Advertisement
4.13 Floppy Disk Drive
Removing the Floppy Disk Drive
To remove the T4700CS/T4700CT/T4800CT's floppy disk drive, follow the steps below and
refer to figures 4-33 through 4-35.
1.
Turn off the power to the T4700CS/T4700CT/T4800CT. Disconnect the AC
adapter, power cord and all external cables connected to the T4700CS/T4700CT/
T4800CT.
2.
Remove the battery pack, optional memory card, optional PCMCIA card, HDD
pack, top cover, keyboard, status indicator panel, backup battery and microphone,
display assembly, upper system board, power supply board, and base assembly as
described in sections 4.2, 4.3, 4.4, 4.5, 4.6, 4.7, 4.8, 4.9, 4.10, 4.11 and 4.12.
3.
Disconnect the FDD cable from PJ304 of the lower system board (figure 4-33).
T4700CS, T4700CT, T4800CT
Figure 4-33 Disconnecting the FDD cable
4 - 3 3
Advertisement
