Log Traps (Notifications) - Nortel Media Gateway 3200 User Manual

H.248 User's Manual
22.2

Log Traps (Notifications)

This section details traps that are not alarms. These traps are sent out with the severity
varbind value of "indeterminate". These traps do not clear, they do not appear in the alarm
history or
acPerformanceMonitoringThresholdCrossing.
Alarm:
OID:
Default Severity
Event Type:
Probable Cause:
Alarm Text:
Status Changes:
Condition:
Trap status:
Note:
Table 22-19: acPerformanceMonitoringThresholdCrossing Log Trap
Alarm:
OID:
Default Severity
Event Type:
Probable Cause:
Alarm Text:
Status Changes:
Condition:
Trap status:
Condition:
Trap status:
Version SN09
active tables. One
Table 22-18: acKeepAlive Log Trap
acKeepAlive
1.3.6.1.4.1.5003.9.10.1.21.2.0.16
Indeterminate
other (0)
other (0)
Keep alive trap
The STUN client in the board is enabled and has either identified a NAT or is
not finding the STUN server
The ini file contains the following line: 'SendKeepAliveTrap=1'
Trap is sent
Keep-alive is sent out every x second.x =0. 9 of the time defined in the
NatBindingDefaultTimeout parameter
acPerformanceMonitoringThresholdCrossing
1.3.6.1.4.1.5003.9.10.1.21.2.0.27
Indeterminate
other (0)
other (0)
"Performance: Threshold alarm was set ", with source = name of
performance counter which caused the trap
A performance counter has crossed the high threshold
Indeterminate
A performance counter has crossed the low threshold
cleared
log trap that does
393
22. Appendix - SNMP Traps
send out clear
October 2006
is