Nortel Media Gateway 3200 User Manual page 267

H.248 User's Manual
ini File Field Name
CallAgentDomainName
CallWaitingToneDuration
ControlDiffServ
CPTransportType
CPTrunkIdOffset
DefaultPacketizationPeriod
DialToneDuration
DigitMapTimeoutTimer
DTMFDigitLength
DTMFInterDigitInterval
EnableCallerIDTypeTwo
EndpointName
Version SN09
Table 12-6: Common Control Parameters
Description
-1 = waits until all calls drop (infinite)
Positive number = the number of
seconds to wait
Defines a domain name to be used to
connect with the Call Agent. The
parameter takes precedence over the
Call Agent IP and the provisioned Call
Agent parameters.
Range = String[63]
Changes the call waiting tones family
duration, in msec.
Defines the value of the field 'DiffServ'
in the IP header for control traffic.
Defines the transport type for the
control protocol:
0 = UDP; 1 = TCP
Sets the trunk numbering offset.
CPTRUNKIDOFFSET_2 causes the
first trunk number to be 2.
Defines the default packetization
period (Frame Size).
Default = 20 msec (for G.723 30)
Defines the timeout (in seconds) for
the dial tone signal.
Defines the timeout value (T symbol)
in a digit map, in increments of 10. For
H.248, it's the start timer. For the rest,
it's the end timer.
Defines the time to play DTMF, in
msec.
Defines the time between DTMFs
played, in msec.
Enables or disables Caller ID Type 2.
If Off (0), Caller ID Type Two is not
played (if playing is requested from
the Call Agent).
0 = Off; 1 = On
H.248: Prefix of the endpoint part of
the termination name
Range: String[19]
Default:
267
12. Appendix - Individual ini File Parameters
Host/Manual
Default Value
NULL
12000
100
100
See Descr.
Valid
Range
See
Descr.
300 to
30000
0 0 to 63
0 0 or 1
0 0, >0
20 5 to 80
16 1 to 65535
16 1 to 65535
0 to 65535
0 to 65535
1 0 or 1
See
Descr.
October 2006