Table of Contents
Advertisement
H.248 User's Manual
3.3.2.1
Inserting Boards
Note:
To insert the TP-1610 board into the chassis, take these 6 steps:
1.
Hold the board horizontally.
2.
With the black ejector/injector latches in the open (pulled out) position, insert the board
in the slot, aligning the board with the grooves on each end.
3.
Ease the board all the way into the slot until the ejector/injector latches touch the
chassis. The Blue hot-swap LED is lit.
4.
Press the two black ejector/injector latches on both ends inward, toward the middle,
until you hear a click.
5.
Wait for the hot-swap blue LED to turn off.
6.
Fasten the screws on the front panel of the board to secure the board to the chassis
and to ensure that the board has a chassis earthing connection.
To insert the TP-1610 RTM into the chassis, take these 6 steps:
1.
Hold the board horizontally.
2.
With the black ejector/injector latches in the open (pulled out) position, insert the board
in the slot, aligning the board with the grooves on each end.
3.
Ease the board all the way into the slot until the ejector/injector latches touch the
chassis.
4.
Press the two black ejector/injector latches on both ends inward, toward the middle
until you hear a click.
5.
Fasten the screws on the front panel of the board to secure the board to the chassis
and to ensure that the board has a chassis earthing connection.
6.
Reattach the cables. (Refer to 'Cabling the MG 3200'.)
3.3.2.2
Configuring and Unlocking the MG 3200
The MG 3200 should be unlocked using the element management system (EMS)
employed in your system. For more information on performing graceful lock, refer to
''Performing Graceful Lock'' on page
element management system (EMS) employed in your system.
Version SN09
Make a note of the MAC address of the replacement board as it is needed
for setting the correct parameter configuration for the replacement board in
the element management system you are utilizing.
42
or the user documentation accompanying the
43
3. Hardware Installation
October 2006
Advertisement
Table of Contents
Troubleshooting
