Media Processing Parameters - Nortel Media Gateway 3200 User Manual

ini File Field Name
TDMBusSpeed
TDMBusType

12.1.4 Media Processing Parameters

The table below lists and describes the Media Processing parameters contained in the ini
file. Use this table as a reference when modifying ini file parameter values.
User's Manual
Table 12-3: Infrastructure Parameters
Description
Selects the TDM bus speed
according to the Bus Type as follows:
SC = 0/2/3
H.110/H.100 = 3
MVIP = 0
Where:
0 = 2048 kbps
2 = 4096 kbps
3 = 8192 kbps
4 = 16384 kbps
Default: TP-260 = 2; All other boards
= 3
Selects the TDM bus interface to be
used (only one TDM bus interface
can be enabled at one time although
more than one can physically exist
on the board).
Range:
0 = acMVIP_BUS
1 = acSC_BUS
2 = acFRAMERS
4 = acH100_BUS
5 = EXT TDM
6 = Analog
8 = SW Pstn
Default:
TP-1610, TP-2810 and TP-6310 = 2;
TPM-1100 = 5; TP-260 = 1
254
MG 3200
Host/Manual Valid
Default Value Range
See Descr. See
Descr.
See Descr. See
Descr.
Document # LTRT-72704