Table 7-30: H.248 Endpoint Names - Nortel Media Gateway 3200 User Manual

H.248 User's Manual
7.2.6.3 Backward Compatibility
The connection between the old naming parameters and the new ones is done by creating
the name pattern from the old name parameters. Let's assume for example that the old
name parameters are:
GATEWAYNAME = "gw"
TRUNKNAME = "s"
ENDPOINTNAME = "chan"
This is equivalent to the following new name parameters:
PHYSTERMNAMEPATTERN = "gws*chan*"
LOGICALRTPTERMPATTERN = "gwrtp/*"
7.2.6.4 Termination Mapping to a PSTN Interface
The table below describes the mapping between Endpoints and channels for a PSTN
interface, according to the interface type used. The table below assumes the following
initial values:
Channel density - 60
Gateway name = 'Acgw/'
Trunk name = 'T'
Endpoint name = '/C',
The table below lists only the names for a two trunks unit.
E1 - PRI/CAS
Endpoint Name E1 - Transparent
Acgw/T0/C1
Acgw/T0/C2
Acgw/T0/C3
Acgw/T0/C4
Acgw/T0/C5
Acgw/T0/C6
Acgw/T0/C7
Acgw/T0/C8
Acgw/T0/C9
Acgw/T0/C10 Trunk#0/TS10
Acgw/T0/C11 Trunk#0/TS11
Acgw/T0/C12 Trunk#0/TS12
Version SN09

Table 7-30: H.248 Endpoint Names

E1 -
Transparent 62
Trunk#0/TS1 Trunk#0/TS1
Trunk#0/TS2 Trunk#0/TS2
Trunk#0/TS3 Trunk#0/TS3
Trunk#0/TS4 Trunk#0/TS4
Trunk#0/TS5 Trunk#0/TS5
Trunk#0/TS6 Trunk#0/TS6
Trunk#0/TS7 Trunk#0/TS7
Trunk#0/TS8 Trunk#0/TS8
Trunk#0/TS9 Trunk#0/TS9
Trunk#0/TS10
Trunk#0/TS11
Trunk#0/TS12
T1/J1 - PRI
Trunk#0/TS1
Trunk#0/TS2
Trunk#0/TS3
Trunk#0/TS4
Trunk#0/TS5
Trunk#0/TS6
Trunk#0/TS7
Trunk#0/TS8
Trunk#0/TS9
Trunk#0/TS10
Trunk#0/TS11
Trunk#0/TS12
119
7. Standard Control Protocols
T1/J1 - CAS
T1/J1 -
Transparent
Trunk#0/TS1
Trunk#0/TS2
Trunk#0/TS3
Trunk#0/TS4
Trunk#0/TS5
Trunk#0/TS6
Trunk#0/TS7
Trunk#0/TS8
Trunk#0/TS9
Trunk#0/TS10
Trunk#0/TS11
Trunk#0/TS12
October 2006