Replacing The Main Corporate Logo With A Text String - Nortel Media Gateway 3200 User Manual

H.248 User's Manual
7. Check the appearance of the logo to verify that it appears as desired. If you want to
modify the width of the logo (the default width is 339 pixels), in the Logo Width field,
enter the new width (in pixels) and press the Set Logo Width button.
8. Save the image to flash memory by clicking the Save Configuration button on the
Save Configuration screen. The new logo appears on all Web interface screens.
Note:
To replace the default logo with your own corporate logo image via
the ini file, take these 2 steps:
1. Place your corporate logo image file in the same folder in which the device's ini file is
located (i.e. the same location defined in the BootP/TFTP server). For detailed
information on the BootP/TFTP server, refer to the Appendix, ''BootP/TFTP Server'' on
page 223
2. Add/modify the two ini file parameters in the table below according to the procedure
described in ''Software Upgrade Wizard'' on page 190.
Note:
Table 23-1: Customizable Logo ini File Parameters for the Image File
Parameter Description
LogoFileName The name of the image file containing your corporate logo.
Use a gif, jpg or jpeg image file.
The default is the provided logo file.
Note: The length of the name of the image file is limited to 47
characters.
LogoWidth Width (in pixels) of the logo image.
Note: The optimal setting depends on the resolution settings.
The default value is 339, which is the width of the displayed logo.

23.2.2 Replacing the Main Corporate Logo with a Text String

The main corporate logo can be replaced with a text string. To replace the default logo with
a text string via the Web interface, modify the two ini file parameters in the table below
according to the procedure described in''Modifying 'ini' File Parameters via the Web
Interface's AdminPage'' on page 402.
Version SN09
If you encounter any problem during the loading of the files, or you want to
restore the default images, click the Restore Default Images button.
.
Loading the device's ini file via the 'Configuration File' screen in the Web
interface does not load the corporate logo image file as well.
23. Appendix - Customizing the Web Interface
399 October 2006