11.1.6 Client Configuration Screen
The Client Configuration screen (refer to the figure, 'Client Configuration Screen' on page
229) shows:
All client entities
MAC
Name
IP per entity
With this screen, users can:
Add a new entry
Delete an existing entry
Modify an existing entry
Test a selected client for finding all BootP servers that respond to a BootP request
with a specific MAC address
If a template is selected, any parameter can be entered manually or copied from the
selected template by marking the checkbox to the right of the parameter. Usually, only an
IP address is entered manually while other parameters are copied from the template.
11.1.7 Template Screen
The Template screen (refer to the figure, 'Templates screen' on page 231) enables the
user to add, modify, or delete templates.
The template includes:
Subnet
Gateway, TFTP server
BootFile
ini file
Call Agent fields
Server IP
User's Manual
226
MG 3200
Document # LTRT-72704