Preferences Screen; Figure 11-2: Preferences Screen - Nortel Media Gateway 3200 User Manual

Log Screen - Displays all BootP requests and TFTP sessions, including the time and
date of the request. In addition, the response type is also displayed:
•
Client Not Found
•
Client Found
•
Client's Mac Changed
•
Client Disabled
Listed at (when using the Test Selected Clients button).
For a TFTP session, file name and download status are displayed.
Pop-Up Menu - Right-clicking on a line in the log screen displays the pop-up menu. In
this menu there two options:
•
Reset - When this option is selected, the program searches the database for the
selected MAC. When the client is found, the program adds the client's MAC to the
ARP table, and then sends a reset command to the client. Note that by
performing the remote reset this way, the user does not have to know the current
IP address of the client. To perform this option, the user must have administrator
privileges, otherwise an error message appears.
•
View Client - This option is the same as double-clicking on a line. When
selected, the Clients Screen opens. If the Client's MAC is found in the database,
it is focused. If not, a new client is added, with the MAC filled out. The remaining
fields require fill in.

11.2.2 Preferences Screen

In the Preferences screen shown below, BootP and TFTP configuration parameters are
defined.
User's Manual

Figure 11-2: Preferences Screen

228
MG 3200
Document # LTRT-72704