Loading The Software Upgrade Key - Nortel Media Gateway 3200 User Manual

6.7.3

Loading the Software Upgrade Key

After receiving the Software Upgrade Key file (do not modify its contents in any way),
ensure that its first line is [LicenseKeys] and that it contains one or more lines in the
following format:
S/N<Serial Number of TPM> = <long Software Upgrade Key>
For example: S/N370604 = jCx6r5tovCIKaBBbhPtT53Yj...
One S/N must match the S/N of your MG 3200 module (TPM). The MG 3200's S/N can be
viewed in the Device Information screen (refer to ''Device Information'' on page 188).
You can load a Software Upgrade Key using:
The Embedded Web Server (refer to ''Loading the Software Upgrade Key Using the
Embedded'' below).
The BootP/TFTP configuration utility (refer to ''Loading the Software Upgrade Key
Using BootP/TFTP'' on page 83).
The EMS (refer to the EMS User's Manual or EMS Product Description).
6.7.3.1 Loading the Software Upgrade Key Using the Embedded Web
Server
To load a Software Upgrade Key using the Web Server, take these
7 steps:
1. Access the MG 3200's Embedded Web Server (refer to "Accessing the Embedded
Web Server" on page 144).
2. Click the Software Update button.
3. Click the Software Upgrade Key tab; the Software Upgrade Key screen is displayed
(shown in the figure, 'Software Upgrade Key Screen' below).
4. When loading a single key S/N line to a MG 3200:
Open the Software Upgrade Key file (it should open in Notepad), select and copy the
key string of the MG 3200's S/N and paste it into the Web field New Key. If the string
is sent in the body of an Email, copy and paste it from there. Press the Add Key
button.
5. When loading a Software Upgrade Key text file containing multiple S/N lines to a
MG 3200:
(Refer to the figure, ''Example of a Software Upgrade Key File Containing Multiple S/N
Lines'' on page 83)
Click the Browse button in the Send "Upgrade Key" file from your computer to the
device field, and navigate to the Software Upgrade Key text file.
Click the Send File button.
The new key is loaded to the MG 3200, validated and if valid is burned to memory.
The new key is displayed in the Current Key field.
6. Validate the new key by scrolling through the 'Key features:' panel and verifying
the presence / absence of the appropriate features.
7. After verifying that the Software Upgrade Key was successfully loaded, reset
the MG 3200; the new capabilities and resources are active.
User's Manual 82
MG 3200
Document # LTRT-72704