Table of Contents
Advertisement
CLI commands are organized in folders. When first entering the CLI, the user is located at
the root folder. The CLI lists the available commands and sub folders. Enter 'h' at the
CommandShell prompt for help on the global commands. 'h <command name>' will
provide help on a specific command.
The following CLI commands are available:
/CONFiguration folder:
SaveAndReset
RestoreFactorySettings
SetConfigParam
GetParameterDescription
GetConfigParam
ConfigFile
AutoUPDate
/MGmt/FAult folder:
ListActive
ListHistory
/IPNetworking/Ping folder:
Ping
PingGetStat
PingStop
/TPApp folder:
BoardInfo
LoadVersion
TimeOfDay
/BSP/EXCeption folder:
ExceptionInfo
PrintHistory
User's Manual
Save all ini-file parameters to non-volatile memory, and reset the
board
Restore factory settings of all ini-file parameters
Set ini file parameters from the shell
Display description of an ini-file parameter
Query ini file parameters from the shell
Retrieve or set current configuration file via Telnet
Check for new ini/CMP files, configured in INIFILEURL and
CMPFILEURL
List the currently active alarms
Show the alarm history table
Ping a remote IP address
Get the status of active ping sessions
Stop active ping sessions
Display general information about the product
Display the current SW version number
Display the system's date and time of day
Display information on the last SW exception
Display the SW exceptions history
212
MG 3200
Document # LTRT-72704
Advertisement
Table of Contents
Troubleshooting
