Table of Contents
Advertisement
H.248 User's Manual
Software Update - Use the menus in this module when you want to load new
software or configuration files onto the device.
Save Configuration - Use this menu to save configuration changes to the non-volatile
(flash) memory.
Reset - Use this menu to remotely reset the device.
Note:
8.4.2
Saving Changes
To save changes to the volatile memory (RAM) press the Submit button (changes to
parameters with on-the-fly capabilities are immediately available, other parameters are
updated only after a device reset). Parameters that are only saved to the volatile memory
revert to their previous settings after hardware reset (software reset i.e. via the Web
Interface offers the option to save the changes to the non-volatile memory prior to the
reset). To save changes so they are available after a power fail, you must save the
changes to the non-volatile memory (flash). When Save Configuration is performed, all
parameters and loaded files are saved to the non-volatile memory.
To save the changes to non-volatile, take the next 2 steps:
1.
From the main menu on the left, click the Save Configuration link. The Save
Configuration screen appears.
2.
Click the Save Configuration button in the middle of the screen. A confirmation
message appears when the save is complete.
To quickly setup a MG 3200, take these 14 steps:
1.
Access the Web Server Interface (refer to "Accessing the Embedded Web Server" on
page 144.)
2.
Enter the Administrator level Username (default: Admin) and Password (default:
Admin).
Note:
3.
Click OK. The Quick Setup screen appears.
Version SN09
When positioning your curser over a parameter name for more than 1
second, a short description of this parameter is displayed.
The Username and Password fields are case-sensitive.
147
8. MG 3200 Management
October 2006
Advertisement
Table of Contents
Troubleshooting
