Nortel Media Gateway 3200 User Manual page 136

8.1.5.4.2 Configuration via the ini File
In the TP-1610 board ini file, parameters below can be set to enable or disable the sending
of SNMP traps. Multiple trap destinations can be supported on the media server by setting
multiple trap destinations in the ini file.
SNMPMANAGERTRAPSENDINGENABLE_<x> = 0 or 1 indicates if traps are to be sent to
the specified SNMP trap manager. A value of '1' means that it is enabled, while a value of
'0' means disabled.
Where <x> = a number 0, 1, 2 and is the array element index. Currently up to 5 SNMP trap
managers can be supported.
Below is an example of entries in the board ini file regarding SNMP. The media server can
be configured to send to multiple trap destinations. The lines in the file below are
commented out with the ";" sign at the beginning of the line. All of the lines below are
commented out since the first line character is a semi-colon.
; SNMP trap destinations
; The board maintains a table of trap destinations containing 5
;rows. The rows are numbered 0..4. Each block of 4 items below
;apply to a row in the table.
; To configure one of the rows, uncomment all 4 lines in that
;block. Supply an IP address and if necessary, change the port
;number.
; To delete a trap destination, set ISUSED to 0.
; -change these entries as needed
;SNMPMANAGERTABLEIP_0=
;SNMPMANAGERTRAPPORT_0=162
;SNMPMANAGERISUSED_0=1
;SNMPMANAGERTRAPSENDINGENABLE_0=1
;
;SNMPMANAGERTABLEIP_1=
;SNMPMANAGERTRAPPORT_1=162
;SNMPMANAGERISUSED_1=1
;SNMPMANAGERTRAPSENDINGENABLE_1=1
;
;SNMPMANAGERTABLEIP_2=
;SNMPMANAGERTRAPPORT_2=162
;SNMPMANAGERISUSED_2=1
;SNMPMANAGERTRAPSENDINGENABLE_2=1
;
;SNMPMANAGERTABLEIP_3=
;SNMPMANAGERTRAPPORT_3=162
;SNMPMANAGERISUSED_3=1
;SNMPMANAGERTRAPSENDINGENABLE_3=1
;
;SNMPMANAGERTABLEIP_4=
;SNMPMANAGERTRAPPORT_4=162
;SNMPMANAGERISUSED_4=1
;SNMPMANAGERTRAPSENDINGENABLE_4=1
User's Manual 136
MG 3200
Document # LTRT-72704