Table of Contents
Advertisement
H.248 User's Manual
8.4.4.12 Trunk Settings
To view the Trunk Settings, take these 11 steps:
1.
From the main menu list on the left, click on the Advanced Configuration link. The
Advanced Configuration screen.
2.
From the Advanced Configuration screen, click the Trunk Settings option in the sub-
menu bar on the top. The Trunk Settings screen appears.
Initially, the screen appears with the parameters fields grayed (indicating read-only).
The Stop Trunk button appears at the bottom of the screen.
3.
To configure a specific trunk's parameters or make a change to any of the parameters,
from the Trunks displayed on the top, click the Trunk Status indicator
Trunk. The number of the Trunk is displayed in the upper-right-hand corner of the
Trunk Configuration display. The parameters displayed are for the selected Trunk
only.
The Trunk Status indicators can appear colored. The table below shows the possible
indicators and their descriptions.
Version SN09
Equation 1: Trunk Settings Screen
173
8. MG 3200 Management
Number
indicates
which Trunk
is selected
to select a
October 2006
Advertisement
Table of Contents
Troubleshooting
