Table of Contents
Advertisement
H.248 User's Manual
8.5
Restoring and Backing Up the Device Configuration
The 'Configuration File' screen enables you to restore (load a new ini file to the device) or
to back up (make a copy of the ini file and store it in a directory on your PC) the current
configuration the device is using.
Back up your configuration if you want to protect your device's programming. The backup
ini file includes only those parameters that were modified and contain other than default
values.
Restore your configuration if the device has been replaced or has lost its programming
information, you can restore the device's configuration from a previous backup or from a
newly created ini file. To restore the device's configuration from a previous backup you
must have a backup of the device's information stored on your PC.
To restore or back up the ini file, take this step:
Open the 'Configuration File' screen (Advanced Configuration menu > Configuration
File). The 'Configuration File' screen is displayed. (Refer to ''Configuration File'' on
page 177.)
To back up the ini file take these 4 steps:
1.
Click the Get INI FILE button; the 'File Download' dialog opens.
2.
Click the Save button. The 'Save As' dialog opens.
3.
Navigate to the folder where you want to save the ini file.
4.
Click the Save button. The VoIP gateway copies the ini file into the folder you
selected.
To restore the ini file take these 4 steps:
1.
Click the Browse button.
2.
Navigate to the folder that contains the ini file you want to load.
3.
Click the file and click the Open button. The name and path of the file appear in the
field beside the Browse button.
4.
Click the Send ini File button, and click OK in the prompt. The gateway is
automatically reset (from the cmp version stored on the flash memory).
Version SN09
207
8. MG 3200 Management
October 2006
Advertisement
Table of Contents
Troubleshooting
