Nortel Media Gateway 3200 User Manual page 237

H.248 User's Manual
ini File Field Name
STUNServerSecondaryIP
SyslogServerIP
SystemOperationStateChange
Profile
TelnetServerEnable
TelnetServerIdleDisconnect
TELNETServerPort
VpFileUrl
Version SN09
Table 12-1: System Parameters
Description
address.
Range = Legal IP address
Defines the secondary STUN server IP
address.
Range = Legal IP address
Defines the IP address in dotted format
notation.
e.g., 192.10.1.255
Range = Legal IP address
This parameter defines the System
Operation state Change Profile.
0 = Disable
1 = Nortel AMS ATM
Refer to the enumerator
acSystemOperationStateChangeProfile
enum for the possible values.
Range = Integer >0
Enables or disables the embedded
Telnet server. Telnet is disabled by
default for security reasons.
0 = Disable
1= Enable
2 = SSL mode (if available - requires
an SSL-aware Telnet client software)
SSL mode is not available on the MP-
108 / MP-124 media gateways
This parameter is used to set the
timeout for disconnection of an idle
Telnet session (minutes). When set to
zero, idle sessions are not
disconnected.
Defines the port number for the
embedded Telnet server.
Range = Valid port number
Links to a Voice Prompts file to be
downloaded from a remote server.
Range = http://server_name/file,
https://server_name/file
237
12. Appendix - Individual ini File Parameters
Host/Manual
Default Value
0.0.0.0
0.0.0.0
NULL
Valid
Range
Descr.
See
Descr.
See
Descr.
0 0 or 1
0 0 to 2
0 Any
number
23 See
Descr.
See
Descr.
October 2006