Nortel Media Gateway 3200 User Manual page 240

ini File Field Name
ISDNDuplicateQ931BuffMode
ISDNGeneralCCBehavior
ISDNIBehavior
ISDNInCallsBehavior
ISDNNFASInterfaceID
ISDNOutCallsBehavior
IUAInterfaceID
LineBuildOut.LOSS
LineBuildOut.OVERWRITE
LineBuildOut.XPM0
LineBuildOut.XPM1
User's Manual
Table 12-2: PSTN Parameters
Description
CRC6
F = J1 Extended SuperFrame with
CRC6 (Japan)
Activates / de-activates delivery of raw
Q.931 messages.
This is the bit-field used to determine
several general ISDN behavior options.
Bit-field used to determine several
behavior options, which influence how
the Q.931 protocol behaves.
This is the bit-field used to determine
several behavior options that influence
how the ISDN Stack INCOMING calls
behave.
Defines the Interface ID. Functions with
NS_EXPLICIT_INTERFACE_ID.
Default = (unsigned char)-1.
This is the bit-field used to determine
several behavior options that influence
how the ISDN Stack OUTGOING calls
behave.
Defines the IUA trunk interface ID value
- unsigned integer - in RFC 3057 -
SigTran. Default = 0xFFFFFFFF.
Selects the line build out loss to be
used for this trunk.
0 = 0 dB
1 = -7.5 dB
2 = -15 dB
3 = -22.5 dB
Overwrites the Framer's XPM registers
values (these registers control the line
pulse shape).
0 = No overwrite
1 = Overwrite
Controls the Framer's XPM0 register
value (line pulse shape control).
Applicable only when
TrunkConfig.LineBuildOut.Overwrite=1.
Should be used only by expert users.
Controls the Framer's XPM1 register
value (line pulse shape control).
240
MG 3200
Host/Manual Valid
Default Value Range
0 -
0 See
Descr.
0 See
Descr.
0 See
Descr.
See Descr. 0 to 255
0 See
Descr.
See Descr. -
0 0 to 3
0 0 or 1
0 0 to 255
0 0 to 255
Document # LTRT-72704