To apply new settings to the Monitoring level, click the Change Monitoring
Password button. The new username/password takes effect immediately.
When making a change, note that the Password and Username can be up to 7
characters and that they are case sensitive. The new password takes effect
immediately.
To reset the username and password to their defaults:
Set the ini file parameter ResetWebPassword to 1 and use the BootP/TFTP Server to
load the ini file to the device (refer to the Appendix, ''BootP/TFTP Server'' on page
223). After loading, the username and password automatically revert to their default
values (Admin).
Note:
their defaults.
8.4.5
Status and Diagnostic Menu
To access the Status and Diagnostics menu, Take this step:
From the main menu list on the left, click on the Status and Diagnostics link. The
Status and Diagnostics screen with the sub-menu bar on the top is displayed.
User's Manual
This procedure resets both Administrator and Monitoring level passwords to
Figure 8-36: Status and Diagnostic Menu Screen
182
MG 3200
Document # LTRT-72704