2.
From the sub-menu bar on the top, click the Auxiliary Files Download link. The
Auxiliary Files Download screen appears.
3.
Use the Browse button to locate the appropriate file on your PC.
4.
Click the Send File button. The files are sent to the MG 3200.
5.
To commit the changes to the non-volatile (flash) memory, in the main menu on the
left, click the Save Configuration link. In the Save Configuration screen that
appears, click the Save Configuration button. The changes are committed to the
non-volatile memory.
Note:
Note:
8.4.6.3
Software Upgrade Key
8.4.6.3.1 About the Software Upgrade Key
MG 3200s are loaded with a Software Upgrade Key already pre-configured for each of its
TrunkPack Modules (TPM).
User's Manual
Figure 8-59: Auxiliary Files Download Screen
For release prior to 5.0, it is recommended to always use a unique filename
when downloading CAS files to the MG3200 gateway. For example, alter
the filename by including a unique release identifier, date time string, or
other meaningful text. Failure to do so will result in difficulty managing the
CAS files due to having several entries with the same name in the CAS file
selection box which may or may not be functionally identical.
A device reset is required to activate a loaded CPT file, and may be required
for the activation of certain ini file parameters. The Burn option must be
selected. (Refer to ''Reset Button'' on page 205.)
200
MG 3200
Document # LTRT-72704