Figure 8-18: Security Settings Screen - Nortel Media Gateway 3200 User Manual

H.248 User's Manual
8.4.4.4 Security Settings
To configure the Security Settings, take these 15 steps:
1. From the main menu list on the left, click on the Advanced Configuration link. The
Advanced Configuration screen appears.
2. From the sub-menu bar on the top, move the cursor on the Network Settings link. A
drop-down menu appears. Click the Security Settings option. The Security Settings
screen appears.
Note:
3. Configure the parameters using the following info as a guide:
•
Default Access Level
200 – This is the default setting for the Security Administrator. (Refer to Table
8-2 on page 162)
•
Require Secured Web Connection (HTTPS)
Disable (HTTP and HTTPS) – This is the default setting and allows both HTTP
and HTTPS.
Version SN09
IPSec Security Settings availability is in accordance with the MG 3200's
Software Upgrade Key.

Figure 8-18: Security Settings Screen

161
8. MG 3200 Management
October 2006