Hisense YXE-A03U Technical & Service Manual page 95

3. Central Controller(YJE-C01T(E))
6
Resetting the System
Resetting Method:
Hold down "ADD.FUNC." button and "ON/OFF"
button for 3 seconds and the buzzer beeps for four
times indicating that the system enters a self-
checking state. Press "
select the series number 3 and press "ENTER"
button. When indicator showing "boot" blinks in
LCD screen, press the "ENTER" button to reset
the system, then all system settings except
those for DIP switches are restored to factory
settings.
7
Snapping Upper Cover into Place
Align the upper cover with the corner buckles of
the lower cover of the central controller, and press
them together until the upper cover snaps into
place.
After installation, please remove the protective
sticker on the central controller.
AFTER-SALE SERVICE
Contact the service shop where you bought the wired
controller.
" (plus) button to
93