Hisense YXE-A03U Technical & Service Manual page 88

3. Central Controller(YJE-C01T(E))
How to cancel:
Hold down "ENTER" button for 3 seconds, the buzzer beeps for 4 times indicating the setting is canceled
and disappears from the LCD, indicating that the button locked function has been canceled.
Simple Timer ON
Operation:
1 After you press TIMER/CLOCK button when the appliance is
shut off, and Timer ON indicator "ON" display on LCD, and
timer hour setting blinks.
2 Press " " (plus) and "
time.
Each time " " button is pressed, time setting increases by 1h.
Each time " " button is pressed, time setting decreases by 1h.
It can be set from 1h to 24h, and time setting resolution is 1 hour.
3 Press "ENTER" button when the desired time is reached.
After operation, the display will be back to the previous display
before TIMER ON setting, and "Timer" indicator appears on the
left corner of the screen.
You can press the "CANCEL" button at any time to cancel the
TIMER ON setting and exit.
You can press the "TIMER/CLOCK" button to cancel the current
setting and exit.
Press "TIMER/CLOCK" button again after TIMER ON has been
set to display the rest of the time.
As shown in the figure, it indicates that the appliance will be started
after 58 minutes.
After the set time is reached, the air conditioners in the current
group/zone will be turned on under unified control.
1. Simple TIMER ON FUNCTION only can be set in shutoff mode.
2. After time setting of TIMER ON FUNCTION, you can set/change mode, adjust temperature
and fan speed, and set Swing mode (if any).
3. After the appliance is turned on, simple TIMER ON FUNCTION will be cancelled. If you need simple
timer setting effective continuously, please set weekly timer.
4. Simple TIMER ON/OFF cannot be set simultaneously.
5. Simple TIMER ON setting is only effective for the current group/zone.
(Invalid under weekly timer setting)
" (minus) button to adjust the
1
Time Setting of TIMER ON FUNCTION
86
ADD. FUNC.
ON/OFF
TIMER/CLOCK SWING ENTER FAN MODE
2
ZONE
CANCEL
Display of TIMER ON Mode
Rest time of TIMER ON Mode