Hisense YXE-A03U Technical & Service Manual page 69

3. Central Controller(YXE-C03U(E))
How to set:
Hold down "ENTER" button for 3seconds, the buzzer beeps for 4 times indicating the setting is
successively set and
How to cancel:
Hold down "ENTER" button for 3 seconds, the buzzer beeps for 4 times indicating the setting is canceled
and disappears from the LCD, indicating that the button locked function has been cancelled.
Clock Setting
In case of any clock loss due to first startup and long-time
shutdown, it is required to set the clock.
Setting method:
1. After startup, all indicators for days of the week and for the clock
on the display screen flicker.
2. Press the " " and " " buttons to respectively adjust the set
values of days of the week, hours, and minutes.
3. Press the "ENTER" button to confirm the setting, the indicators
for days of the week, hours, and minutes stop flickering, and
then the setting is completed.
NOTE:
If you continuously press the
Clock Correction
When the clock value is not consistent with the
standard time, the clock shall be corrected.
Setting method:
Hold down the "ON/OFF" button for 3s, the wired
remote controller will be shut down, and hold down
the "TIMER/CLOCK" button for 3s again, it will go
into the clock correction mode.
Adjust the clock in the following sequence:
Days of week
1. First, the cursor right above days of week will flicker, and then you can press the "
" " (minus button) to adjust the date to the required one, e.g., Thursday
"ENTER" button to confirm the settings.
2. Next, the hours setting icon
and " " (minus button) to adjust the hour to the required one, and press the "ENTER" button to
confirm the settings.
3. At last, it proceeds to minutes setting in sequence (the setting method is the same to that for hours).
The icons will stop flickering after the clock correction setting is completed.
NOTE:
If you continuously press the
displays on the LCD, indicating that the lock is now energized.
/ button, the time set value will increase or decrease rapidly.
Minutes
Hours
will flicker in succession, and then you can press the "
/ button, the time setting value can be increased or decreased rapidly.
2
1
2
67
Indicator for
Clock
days of week
3
" (plus button) and
, and press the
" (plus button)