3. Central Controller(YXE-C03U(E))
3.1.3 Checking and Setting
Indoor Unit Parameter Checking
The internal parameters of the air conditioner can be read with the following method
Instruction
1. Hold down Mode button and ADD. FUNC. button for 3s simultaneously to enter parameters
customer-reading state, and then customer-reading parameter codes will display in the temperature
display area. (See fig. 1)
2. Press Up or Down button to adjust to the customer-reading parameter code to read. For detailed
information, please refer to Table 1. For example, the picture above means that it is a duct indoor unit.
(See fig. 2)
3. Press ON/OFF button to quit customer-reading state. (see fig. 3)
确 定
fig. 1
fig. 2
Table 1
确 定
fig. 3
74
.
确 定