Hisense YXE-A03U Technical & Service Manual page 70

3. Central Controller(YXE-C03U(E))
Simple Timer ON
Operation:
1. After you press "TIMER/CLOCK" button when the appliance
is shut off, and timer on indicator "ON" display on LCD,
"ON" and timer hour setting flicker.
2. Press " " (plus) and "
time.
Each time " " button is pressed, time setting increases by 1h.
Each time " " button is pressed, time setting decreases by 1h.
It can be set from 1h to 24h, and time setting resolution is 1 hour.
3. Press "ENTER" button when reaching the desired time .
After operation, the display will be back to previous display
before timer on setting, and "Timer" indicator appears on the
bottom-left corner of the screen.
You can press the "CANCEL" button at any time to cancel the
timer on setting and exit.
You can press the "TIMER/CLOCK" button to cancel the current
setting and exit.
Simple TIMER ON inquiry
Press "TIMER/CLOCK" button again after TIMER ON has been set to display the rest of the time.
As shown in the figure, it indicates that the appliance will be started after 58 minutes.
30s without any operation will quit query.
NOTE:
Simple timer only to be set in shutoff mode.
Simple Timer OFF
Operation:
1 After you press "TIMER/CLOCK" button when the appliance
is on, and timer off indicator "OFF" display on LCD, "OFF"
and timer hour setting flicker.
2 Press " " (plus) and " " (minus) button to adjust the
time.
Each time " " button is pressed, time setting increases by 1h.
Each time" " button is pressed, time setting decreases by 1h.
It can be set from 1h to 24h, and time setting resolution is 1 hour.
3 Press "ENTER" button when reaching the desired time.
After operation, the display will be back to previous display
before timer off setting, and "Timer" indicator appears on the
bottom-left corner of the screen.
Simple TIMER ON inquiry
You can press the "CANCEL" button at any time to cancel the
timer off setting and exit.
You can press the "TIMER" button to cancel the current
setting and exit.
Press "TIMER/CLOCK" button again after TIMER OFF has been
set to display the rest of the time.
As shown in the figure, it indicates that the appliance will turn off
after 58 minutes.
30s without any operation will quit query.
NOTE:
The TIMER ON/OFF functions can not be set at the same time, if you need TIMER ON/OFF work in the
future, please use WEEKLY TIMER function.
(Invalid under weekly timer set)
" (minus) button to adjust the
(Invalid under weekly timer set)
68
TIMER ON time setting
TIMER ON state display
TIMER ON remaining time
TIMER OFF time setting
TIMER OFF state display
TIMER OFF remaining time