Hisense YXE-A03U Technical & Service Manual page 66

3. Central Controller(YXE-C03U(E))
Simple Operation
This wired remote controller should be used with the air conditioner. It can be used for cooling,
heating, dry and fan, etc. For other functions and settings, please refer to the specific operation in
this manual.
3
确 定
5
3
2. Mode Setting
Press "MODE" button to select mode operation under shutdown state and no timer has been set.
Each time MODE button is pressed, the operation mode changes in the sequence below:
COOLING
NOTE:
AUTO mode is invalid for models without AUTO mode when setting.
HEATING mode is invalid for cooling only types or heating-forbidden air conditioners.
3.Temperature Setting
Under ON conditions or under OFF conditions where TIMER ON function is enabled, press
" " or " " button to enter the temperature setting state.
Each time " " button is pressed , the temperature setting rises by 1℃；
Each time " " button is pressed , the temperature setting lowers by 1℃.
Setting temperature is finished 5 seconds after the set temperature value flickering.
HEATING, COOLING, DRY
FAN ONLY
NOTE:
1. Heating mode is invalid for cooling-only air conditioners.
2. The default setting range depends on the indoor unit.
3. Setting range can be changed by professional stuff, and for detailed operations, please contact
the installation service/after-sales service center.
4. When the set temperature reaches the upper or lower limits, " " icon will display on the LCD, the
set temperature will not rise or fall any more.
4. Fan Speed Setting
Under ON conditions or under OFF conditions where TIMER ON function is enabled, press the
"FAN" button to adjust the fan speed. The fan speed will change in the following sequence:
HIGH
(Display moves from the left to the right)
1
2
4
DRY
FAN ONLY HEATING
Range of Temperature Setting
16℃ ~30℃
Unavailable for setting
AUTO LOW
1. Turning ON/OFF
<To start operation>
Press the ON/OFF button, the ON lamp lights up, and
the appliance will be started.
<To stop operation>
Press the ON/OFF button again, the ON lamp goes off,
and the appliance will be stopped.
Hold down "ON/OFF" button for more than 3 seconds,
the appliance will enter completely shutdown state.
(When the indoor unit stops, do not use timer ON to start, but
start it manually), the buzzer beeps for 4 times.
AUTO
MEDIUM
64