Hisense YXE-A03U Technical & Service Manual page 47

2. Wired Controller(YXE-C02U1(E))
Self-setting Parameters
The internal parameters of the wired controller
can be set with the actual usage conditions.
The catalogue of custom-setting parameters is
shown as follows:
Custom-
setting Implication of Code
Parameter Display
Code
01 Version No.
03 boot Restore factory default
Integrated control Baud
04
rate setting
Is remote control/button
operation setting
permitted or not
05
Temperature display
06
setting
Temperature
07 measurement unit
display setting
08 Cooling-only setting
Address revision setting 0-Address revision prohibited;
09
1-Address revision permitted
Temperature limits
10
0-Prohibited；1-Permitted
revision setting
Room temperature
11
0-Prohibited；1-Permitted
revision setting
The Method of Setting the Custom Parameters
2
. .
ADD FUNC
1
TIMER/CLOCK SWING ENTER
CANCEL
2
1. Press and hold " ADD. FUNC" and "ON/OFF"
buttons at the same time for 3s, to access the
the custom-setting mode, and the custom-
setting parameter code will flicker on the
screen.
2. Press the " " button (plus) or "
(minus) to select the custom-setting parameter
code that is required to be set, and press the
"ENTER" button, with the function code
displayed in flickering.
3. Press the " " (plus) button or "
button to select the function code, and press
the "ENTER" button to confirm the setting.
How to exit:
Press "Cancel" button to exit when any custom-
setting code is displayed.
Description Remarks
0-9600bps;1-19200bps;
2-38400bps;3-76800bps
0-Remote control/button
permitted;
1-Reserved;
2-Button prohibited;
3-Remote control/button
prohibited;
.......
see the table3 on the right for
more content
0-Display the set temperature;
1-Display the indoor room
The factory
temperature
setting
defaults to 0
0-Display in Celsius;
1-Display in Fahrenheit degree
0-Heat pump type air
conditioner;
1-Cooling-only air conditioner
Custom-setting
parameter code
Function code
ON/OFF
1
FAN MODE
3
SLEEP
" button
" (minus)
NO
0 Remote control/button permitted
1 Remote control prohibited
2 Button prohibited
3 Remote control/button prohibited
5 Turning ON/OFF by remote control prohibited
13 Turning on by remote control & MODE setting prohibited
17 Temperature setting by remote control prohibited
Temperature setting by remote control prohibited &
21
ON/OFF setting prohibited
Temperature setting by remote control prohibited &
25
MODE setting prohibited
Temperature setting by remote control prohibited &
29
MODE setting & ON/OFF setting prohibited
33 Fan speed setting prohibited
37 Fan speed & ON/OFF setting prohibited
41 Fan speed & MODE setting prohibited
45 Fan speed & MODE & ON/OFF setting prohibited
49 Fan speed & temperature setting prohibited
53 Fan speed & temperature & ON/OFF setting prohibited
57 Fan speed & temperature & MODE setting prohibited
Fan speed & temperature & MODE & ON/OFF setting
61
prohibited
65 Swing setting prohibited
69 Swing & ON/OFF setting prohibited
73 Swing & MODE setting prohibited
77 Swing & MODE & ON/OFF setting prohibited
81 Swing & temperature setting prohibited
85 Swing & temperature & ON/OFF setting prohibited
89 Swing & temperature & MODE setting prohibited
Swing & temperature & MODE & ON/OFF setting
93
prohibited
97 Fan speed & swing setting prohibited
101 Fan speed & swing & ON/OFF setting prohibited
105 Fan speed & swing & MODE setting prohibited
Fan speed & swing & ON/OFF & MODE setting
109
prohibited
113 Fan speed & swing & temperature setting prohibited
Fan speed & swing & temperature & ON/OFF setting
117
prohibited
Fan speed & swing & temperature & MODE setting
121
prohibited
Fan speed & swing & temperature & ON/OFF & MODE
125
setting prohibited
45
Table 3
Description