Table of Contents
Advertisement
3
3.2 Set up the E10A-USB Emulator Software
This section explains how to set up the E10A-USB emulator software.
3.2.1 E10A-USB Emulator Software Installation
(1) Execute "HewInstMan.exe" stored in the E10A-USB emulator software CD-ROM. The Install Manager will start up automatically.
Click [Installation].
(2) Following dialog box will appear as Figure 3.2.2. Select the "Update the active High-performance Embedded Workshop"
radio button and click "Next".
Rev. 1.00 July 11, 2008
REJ10J1328-0100
Figure 3.2.1 E10A-USB Software Installation (1/7)
Figure 3.2.2 E10A-USB Software Installation (2/7)
Setting Up the Software
3.2.1 E10A-USB Emulator Software Installation
3-5
Advertisement
Table of Contents
