Table of Contents
Advertisement
5
(3) The [Section address] dialog box will open. Enter "0xA0000600" in the [Address] as shown in Figure 5.3.11 and click "OK".
(4) The Section address is added, and the display returns to the [Section] dialog box. Select the blank space of Section as shown in
Figure 5.3.12 and click "Add...".
(5) The [Add section] dialog box will open. Enter "PCACHE "in the [Section name] as shown in Figure 5.3.13 and click "OK". The
[CACHE] section is defined in the "cache.c" source file. The first character "P" stands for P section.
Rev. 1.00 July 11, 2008
REJ10J1328-0100
Creating and Running a New Project Workspace
Figure 5.3.11 Section Setting (3/6)
Figure 5.3.12 Section Setting (4/6)
Figure 5.3.13 Section Setting (5/6)
5.3.5 Set Link/Library
5-15
Advertisement
Table of Contents
