3
(3) Search for the driver in the CD-ROM, select "<drive>:¥drivers¥usb¥xp¥e1usb.cdr.inf", and then click "Next". The underlined
'xp' indicates the version of the operating system (This example is for Windows XP).
Note: When an error message saying the software you are installing has not passed Windows Logo testing.. appears,
just click "Continue Anyway". The version numbers shown in the dialog box depends on the version that the
E10A-USB emulator supports.
(4) [Completing the Found New Hardware Wizard] dialog box will appear. Click "Finish". The E10A-USB emulator driver setup is
now completed.
Rev. 1.00 July 11, 2008
REJ10J1328-0100
Figure3.2.19 New Hardware Wizard (3/3)
Figure 3.2.20 New Hardware Installed
Setting Up the Software
3.2.2 Set up the E10A-USB Emulator
3-15