Table of Contents
Advertisement
5
(b) Section modification example (Changes section B to the on-chip RAM area)
Following shows an example for changing section B to the on-chip RAM area.
For details on the section setting, refer to paragraph (a) above.
(1) In the [Section] dialog box, select section B, and click "Remove".
(2) In the [Section] dialog box, set the section B to the on-chip RAM area shown in Figure 5.3.16.
Example: Changes the section setting for on-chip RAM area
• [Address]: 0xE55FC000
• [Section]: B
Rev. 1.00 July 11, 2008
REJ10J1328-0100
Creating and Running a New Project Workspace
Figure5.3.15 Change Section (1/2)
Figure 5.3.16 Change Section (2/2)
5.3.5 Set Link/Library
5-17
Advertisement
Table of Contents
