Table of Contents
Advertisement
(2) Open the [Link/Library] tab and select the items as below, and click [Add].
• Category: Output
• Show entries for: ROM to RAM mapped sections
(3) Select the items as below in the [Add Rom to Ram] dialog box, and click "OK".
Return to the [SuperH RISC engine Standard Toolchain] dialog box and click "OK" to complete the setting.
• ROM section: DINTTBL
• RAM section: RINTTBL
Rev. 1.00 July 11, 2008
REJ10J1328-0100
Figure 5.3.18 Change Section (2/3)
Figure5.3.19 Change Section (3/3)
5-19
Advertisement
Table of Contents
