Table of Contents
Advertisement
4
Note: If the reset signal cannot be detected, the following dialog box will appear. Click "Ignore" to issue an internal reset
to the CPU and to start up the system.
(10) When the message "Connected" appear in the [Output] window of High-performance Embedded Workshop, the E10A-USB
emulator startup is now completed.
Rev. 1.00 July 11, 2008
REJ10J1328-0100
4.1.2 M3A-HS19 and E10A-USB Startup (High-performance Embedded Workshop Startup)
Figure 4.1.7 [Cannot find RESET Signal] Dialog Box
Figure4.1.8 [Output] Window
Executing the Software
4-5
Advertisement
Table of Contents
