Table of Contents
Advertisement
4
(6) Executes the program
Select "Go" from the [Debug] menu to execute the software. (See Figure 4.1.18)
If the sample software has been downloaded correctly, LED1 on the M3A-HS19 flashes at 1-second interval.
Notes:
• The contents of "resetprg.c" may depend on the version of the sample software.
• If an error occurs or the sample software does not operate correctly, the hardware or the software may not
have been set up correctly. Check the setup procedures in Chapter 2 and Chapter 3.
Rev. 1.00 July 11, 2008
REJ10J1328-0100
Figure 4.1.18 Executing the program
Executing the Software
4.1.4 How to Download the Sample Software
4-11
Advertisement
Table of Contents
