4
Note: A message "Please choose driver" will appear at the first time. Click "OK" to show the following window to
select the driver. Select "Renesas E-Series Driver".
(8) Following dialog box will appear and start to connect the emulator.
(9) The following dialog box will appear. Ignore this dialog box, and turn on the power for the M3A-HS19 CPU board. Then, press the
reset button on the CPU board, and click "OK" on the dialog box.
Rev. 1.00 July 11, 2008
REJ10J1328-0100
4.1.2 M3A-HS19 and E10A-USB Startup (High-performance Embedded Workshop Startup)
Figure 4.1.4 [Driver Details] Dialog Box
Figure 4.1.5 [Connecting] Dialog Box
Figure 4.1.6 Dialog box to request the RESET signal input
Executing the Software
4-4