Table of Contents
Advertisement
3
(2)
Following dialog box will appear as Figure 3.1.2. Click "Next".
Note: If the High-performance Embedded Workshop is already installed, select the "Install a new High-performance
Embedded Workshop" radio button to install it in another directory.
(3)
Follow the on-screen instructions to continue.
(4)
Install the AutoUpdate Utility. Click "Next".
Note: If the "AutoUpdate Utility" checkbox is not ticked, above window as
Rev. 1.00 July 11, 2008
REJ10J1328-0100
Figure 3.1.2 Installation Procedure (2/4)
Figure 3.1.3 Installation Procedure (3/4)
Setting Up the Software
3.1 About the High-performance Embedded Workshop
Figure 3.1.3
will not appear.
3-3
Advertisement
Table of Contents
