Table of Contents
Advertisement
1
1.5 What You Need to Get Started (Not included in this product)
Following items are not included in this product and should be prepared by user.
<For the M3A-HS19 CPU Board>
Prepare following power supply in order to supply power to the M3A-HS19 CPU board.
No.
1
5 V DC output regulated power supply
<For the Development Environment>
This manual describes how to install this product using the Renesas development tools.
To install this product as described in this manual, prepare following Renesas development tools.
No.
E10A-USB Emulator for SuperH RISC engine
2
Family
3
SuperH RISC engine C/C++ Compiler Package
Integrated development environment tool
4
High-performance Embedded Workshop
Notes:
• If you already have the E10A-USB emulator and are using any MCUs other than the SH-2 group,
purchase a license tool for device group additions to use additional MCUs (not included in this product).
• For details on how to setup a new device group in the E10A-USB Emulator, refer to section 3.2.2, Set up the
E10A-USB Emulator in this manual.
1.5.1 Recommended Host Computer Environment
Followings are the recommended operation environment to use the above Renesas development tools
Host Computer
Specifications
CPU
Memory
Hard disk
OS
Rev. 1.00 July 11, 2008
REJ10J1328-0100
Table 1.5.1 Power Supply (For the M3A-HS19 CPU Board)
Item
Table 1.5.2 Renesas Development Tools
Item
Table 1.5.3 Operating Environment for the Renesas Development Tools
IBM PC or its compatible machine with Pentium III or later (600 MHz or higher
recommended) and USB port compliant to USB 1.1/2.0 port (full-speed)
128 MB or more (at least twice of the load module size recommended)
Installation requires 100 MB or more of hard disk capacity.
(To reserve the swap area in the hard disk, at least twice of the memory size must be
available. Four times or more recommended.)
Windows 98 SE, Windows Me, Windows 2000, Windows XP
1.5 What You Need to Get Started (Not included in this product)
Part number
HS0005KCU01H or
HS0005KCU02H
R0C40700XSW09R
-
IBM PC/AT Series or its Compatibles
Introduction
Remarks
1.5 A min.
Applicable Version
Supports the SH-2 device Group
Ver.9.01 Release01 or later
Ver.4.03.00 or later
1-5
Advertisement
Table of Contents
