Table of Contents
Advertisement
5
(6) Project Generator will start.
In this manual, "test" is used for the workspace name. Check that the Directory, CPU family and Tool chain are set as follows,
then click "OK".
(7) In the [New Project-1/9-Select Target CPU] dialog box, select "SH-2" for the CPU Series, and "SH7619" for the CPU Type from
the drop-down list.
(8) Follow the on-screen instructions of the [New Project-2/9] through [New Project-4/9] dialog boxes. Leave the default setting in
this installation step (Select the checkbox as appropriate). Click "Next".
Rev. 1.00 July 11, 2008
REJ10J1328-0100
Figure 5.1.2 [New Project Workspace] Dialog Box
Figure 5.1.3 [New Project-1/9] Dialog Box
Creating and Running a New Project Workspace
5.1.2 How to Create a New Project Workspace
5-3
Advertisement
Table of Contents
