Table of Contents
Advertisement
5
(11) In the [New Project-7/9] dialog box, set up the Target as below;
Select the "Target type" and then select "Targets".
Target type: SH-2
Targets: SH7618 E10A-USB SYSTEM (CPU SH-2)
(12) Confirm settings in [New Project-8/9] and [New Project-9/9] dialog boxes and click [Finish].
Follow the on-screen instructions to finish the Project Generator.
The High-performance Embedded Workshop is activated to automatically generate the standard source files for the SH-2 device
group.
(13) After the High-performance Embedded Workshop is activated, connect the E10A-USB emulator.
The E10A-USB emulator can be connected by switching session to the one for the E10A-USB emulator as shown in Figure 5.1.7
Note: A dialog box to notify that the default session has been modified will appear. Click [Yes].
Rev. 1.00 July 11, 2008
REJ10J1328-0100
Figure 5.1.6 [New Project-7/9] Dialog Box
Figure 5.1.7 [E10A-USB Emulator Connection Setup] Window
Creating and Running a New Project Workspace
5.1.2 How to Create a New Project Workspace
5-5
Advertisement
Table of Contents
