Huawei UPS5000-H-1200K-NT User Manual page 301

UPS5000-H-(1200 kVA-1600 kVA)
User Manual (100 kVA Power Module)
Figure 4-324 Installing battery cables
Step 8 (Perform this step only for the top air-flow configuration.) Install cables for the
top air-flow cabinet.
1.
2.
Step 9 Install signal cables outside the cabinets.
●
Issue 07 (2022-11-29)
Remove an accessory cover from the top of the top air-flow cabinet.
Connect the power cable to the 380~480V System port on the UPS, connect
the signal cable of the top air-flow cabinet on the left to the PU XS2-1 in
power cabinet 1, and connect the signal cable of the top air-flow cabinet on
the right to the PU XS2-2 in power cabinet 2.
Figure 4-325 Power supply to the top air-flow cabinet
If you need to log in to the WebUI of the UPS monitoring system, connect the
network port on a PC to the FE port on the monitoring interface card of the
UPS.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Installation and Cable Connection
292