Huawei UPS5000-H-1200K-NT User Manual page 288

Hide thumbs Also See for UPS5000-H-1200K-NT:

Table of Contents

UPS5000-H-(1200 kVA-1600 kVA)

User Manual (100 kVA Power Module)

Figure 4-303 Installing power cables between the UPS and the SmartLi

(1) Connect the ground cable of the battery string or its BBB box to the battery PE of the UPS

or the ground bar in the equipment room based on the site survey.

Step 6 Install top supports and covers of the battery terminal protective covers.

Figure 4-304 Installing top supports and covers

Step 7 Install input and output busbars.

Table 4-15 Power cable terminal requirements

Mains input/bypass

input/output/PE

Step 8 Install power distribution units. (If the mains input and bypass input share a

power source, a power distribution unit must be deployed for the copper bars that

are not installed in the busway. Copper bars must not be exposed.)

Issue 07 (2022-11-29)

4 Installation and Cable Connection