Huawei UPS5000-H-1200K-NT User Manual page 230

UPS5000-H-(1200 kVA-1600 kVA)
User Manual (100 kVA Power Module)
Step 9 Move the cabinets to the installation positions.
Step 10 Insert the T-shaped bolts and secure the front anchor fasteners.
● When combining the top air-flow cabinet with other cabinets, route two T-
● In the front of the UPS cabinet, top air-flow cabinet, and inductor cabinet,
● The connecting kits should be installed in the front of the left and right
1.
2.
3.
4.
5.
Issue 07 (2022-11-29)
Figure 4-200 Securing rear anchor fasteners
NO TE
There are sheet metal stiffeners at the bottom of the inductor cabinet. After the pallet is
removed, the pallet truck cannot transport the inductor cabinet from the front. Therefore,
reserve space on the side of the inductor cabinet or use other transportation methods.
NO TICE
shaped bolts into the same floor mounting kit.
place connecting kits before securing anchor fasteners.
cabinets. You do not need to install the connecting kits at both ends.
Remove the preinstalled connecting kits from the cabinets.
Insert the T-shaped bolts into the U-shaped slots of the rear anchor fasteners.
Push the heads of the T-shaped bolts backwards until they are inserted into
the floor mounting kits.
Insert the front anchor fasteners into the T-shaped bolts.
Secure the front anchor fasteners.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Installation and Cable Connection
221