Huawei UPS5000-H-1200K-NT User Manual page 264

UPS5000-H-(1200 kVA-1600 kVA)
User Manual (100 kVA Power Module)
● Cables have been preinstalled and bound in the inductor cabinet.
● The cables from the inductor cabinet to the UPS are configured based on the
● Cables must be bound to the nearest beam or cable bridge according to the
●
●
Issue 07 (2022-11-29)
NO TICE
longest cable length before delivery. If short cables are needed in the actual
installation scenario, you can cut the excess cables and crimp terminals.
route shown in the figure.
One power source
Figure 4-262 Removing the cover
Figure 4-263 Installing cables
(1) Side view of the UPS
Two power sources
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Installation and Cable Connection
(2) Power cable hole (3) Signal cable hole
255