Huawei UPS5000-A-600K-SC User Manual
  1. Manuals
  2. Brands
  3. Huawei Manuals
  4. UPS
  5. UPS5000-A-600K-SC
  6. User manual
Huawei UPS5000-A-600K-SC User Manual

Huawei UPS5000-A-600K-SC User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
UPS5000-A-(600 kVA-800 kVA)
User Manual (40 kVA)
Issue
03
Date
2017-10-16
HUAWEI TECHNOLOGIES CO., LTD.

Advertisement

Table of Contents
loading

Related Manuals for Huawei UPS5000-A-600K-SC

Summary of Contents for Huawei UPS5000-A-600K-SC

  • Page 1 UPS5000-A-(600 kVA-800 kVA) User Manual (40 kVA) Issue Date 2017-10-16 HUAWEI TECHNOLOGIES CO., LTD.
  • Page 2 Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS"...

  • Page 3: About This Document

    Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 4 Updated the maximum voltage and current which the monitoring interface card can support, optimized the dual bus scenario, and updated the routine maintenance. Issue 01 (2015-06-25) This is the first release. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 5: Table Of Contents

    2.3.4 MDU ..................................30 2.4 Typical configurations ..............................32 2.4.1 Single UPS ................................32 2.4.2 N+X Parallel System ............................... 33 2.4.3 Dual-Bus System ..............................33 2.5 Optional Components ..............................34 Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 6 3.5 Installation Verification ............................. 123 4 User Interface ..........................126 4.1 LCD Interface ................................126 4.1.1 LCD Menu ................................126 4.1.1.1 Menu Hierarchy ..............................126 4.1.1.2 Initial Startup ..............................126 Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 7 5.1.9 Performing EPO ..............................201 5.1.10 Clearing the EPO State ............................202 5.2 Parallel System Operations ............................205 6 Routine Maintenance ....................... 206 6.1 UPS Maintenance ..............................206 Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 8 A Menu Hierarchy ........................219 A.1 Menus on the LCD ..............................219 A.2 Menus on the WebUI ............................... 221 B Alarm List........................... 233 C Acronyms and Abbreviations ....................246 Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 9: Safety Precautions

    Follow the precautions and special safety instructions provided by Huawei when operating Huawei products. Huawei will not be liable for any consequences that are caused due to violations regarding general safety regulations and equipment design, production, and usage safety standards.
  • Page 10 Personal Requirements Only Huawei engineers or engineers certified by Huawei are allowed to perform UPS commissioning and maintenance. Otherwise, human injury or equipment damage may occur, and any resulting UPS faults will be beyond warranty scope.

  • Page 11: Electrical Safety

     Never use water to clean electrical components inside or outside the UPS.  Do not drill holes into a cabinet. 1.2 Electrical Safety High Voltage Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 12 Otherwise, electric shocks may occur.  Before installing or removing the power cable, open the power switch.  Before connecting a power cable, check that its label is correct. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 13 Package boards with ESD packaging materials before storing or transporting them. Figure 1-1 shows how to wear an ESD wrist strap. Figure 1-1 Wearing an ESD wrist strap Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 14: Operating Environment

    This section describes precautions for operating batteries. Before operating batteries, carefully read the safety precautions to ensure correct battery handling and connection is performed, and personal safety is managed. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 15 1 Safety Precautions  To ensure battery safety and efficient battery management, use the batteries delivered with the UPS. Huawei shall not be responsible for battery damage caused by using non-Huawei batteries for Huawei UPSs.  Ensure lead-acid battery handling is in accordance with local regulations.

  • Page 16: Mechanical Safety

    If any personnel are exposed to battery electrolyte, wash the exposed area with clean water immediately and seek medical advice if the situation is serious. 1.5 Mechanical Safety Moving Sharp Objects Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 17 Figure 1-2 Tilting angle of a cabinet Handling Fans Do not insert fingers or boards into the operating fans until the fans are switched off, and have stopped running. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 18: Laying Out Cables

    The air exhaust vent should not be blocked by any object. Before connecting a cable, ensure that the cable and cable label to be used meet the actual installation requirements. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 19: Overview

    The UPS5000-A is an online double-conversion UPS that uses digital signal processing (DSP) technology and features high efficiency and high power density. Figure 2-2 shows a conceptual diagram for the UPS. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 20: Working Modes

    Figure 2-3 shows the conceptual diagram of the UPS working in normal mode. Figure 2-3 UPS conceptual diagram in normal mode Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 21: Bypass Mode

    If the AC input voltage is not normal, the UPS transfers to battery mode to obtain power from batteries. The inverter then converts the power into AC outputs. Figure 2-5 shows a conceptual diagram of the UPS working in battery mode. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 22: Maintenance Bypass Mode

    ECO voltage range, the bypass combined switch turns on, and the bypass supplies power. When the bypass input voltage is beyond the ECO Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 23: Product Introduction

    UPS working in ECO mode. Figure 2-7 UPS conceptual diagram in ECO mode 2.3 Product Introduction 2.3.1 Appearance Figure 2-8 Figure 2-9 show the UPS. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 24 2 Overview Figure 2-8 600 kVA UPS (1) Power cabinet 1 (2) Power cabinet 2 (3) Anchor baffle plates (4) Bypass cabinet (5) Monitor display unit (MDU) Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 25: Product Structure

    (6) Monitor display unit (MDU) 2.3.2 Product Structure Figure 2-10, Figure 2-11, Figure 2-12 Figure 2-13 show the product structures. Figures are UPSs with the front doors open. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 26 Figure 2-10 Product structure (UPS5000-A-600 kVA in standard configuration) (1) Power units (2) Control (3) Optional card slot (behind the filler unit panel) (4) Maintenance bypass (5) Bypass switch unit Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 27 (2) Control unit (3) Optional card slot (behind the filler panel) (4) Mains input switch (5) Output (6) Maintenance bypass switch switch (7) Bypass input (8) Bypass unit switch Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 28 (5) Bypass switch unit Figure 2-13 Product structure (UPS5000-A-800 kVA in full configuration) (3) Optional card slot (behind the filler (1) Power units (2) Control unit panel) Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 29: Control Unit

    The control unit consists of two ECMs in active/standby mode. Each ECM provides one bus synchronization controller (BSC) port and one parallel port, as shown in Figure 2-15. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 30 ECM is being upgraded. FAULT Steady on The ECM has a critical alarm. The ECM has no critical alarm or the DSP of the ECM is being upgraded. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 31: Dry Contact Card

    Port for signal ground EPO_NO Emergency power-off If the normally open Disconnected (EPO) port (NO) port is connected to the EPO_12V +12 V EPO_12V port, EPO is triggered. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 32 The dry contact card allows the UPS to detect and manage the switch status of the battery system (including the external battery switch) and implement remote emergency power-off (EPO). Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 33: Monitoring Interface Card

    DO_1 to DO_4 meet the maximum voltage and current requirements of 30 V DC/1 A or 60 V DC/0.5 A. Table 2-4 Ports on the monitoring interface card Silk Port Description Screen Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 34 0.5–1.5 mm  RS485 cables and FE cables must be shielded cables. Figure 2-18 Figure 2-19 are recommended wiring methods for DO ports. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 35 Figure 2-18 Wiring method 1 Figure 2-19 Wiring method 2 Figure 2-20 Table 2-5 describe the COM1 pin definitions. Figure 2-20 COM1 pins Table 2-5 COM1 pin definition Description RS485- Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 36 COM2 pin definitions. Figure 2-21 COM2 pins Table 2-6 COM2 pin definition Description RS485+ RS485- RS485+ RS485- CANH0 CANL0 Figure 2-22 Table 2-7 describe the RS485 pin definitions. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 37 Connect pins 1, 2, 4, and 5. Twist cables to pin 1 and pin 4 into one cable and then connect it to RS485+. Twist cables to pin 2 and pin 5 into one cable and then connect it to RS485–. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 38: Mdu

    Color Meaning A critical alarm has been generated, and the buzzer sounds continuously. Yellow A minor alarm has been generated, and the buzzer buzzes at 2 Hz. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 39 LCD online and upgrading configurations Restart switch for the MDU Reserved Implements specific functions by DIP switch using the DIP switch and specific buttons; controls the CAN Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 40: Typical Configurations

    The UPS5000-A is a high frequency tower-mounted UPS. It uses a unit-level design to handle power functionality, and provides an embedded maintenance bypass switch to ensure maintenance with power on. Figure 2-2 shows the conceptual diagram of a single UPS. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 41: N+X Parallel System

    (STS) can be installed to start the bus synchronization controller (BSC). The UPS systems work in normal mode or bypass mode. Figure 2-27 shows a conceptual diagram of a dual-bus system. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 42: Optional Components

    (BBB) box  PDU8000-2000DC V8-BGA001 PDU8000-2000DCV8 -BGA001 Antiseismi Reinforces the cabinet so that the cabinet c kit meets the requirements of 9 degree seismic fortification intensity. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 43 15 m or 60 m Transmits bus synchronization signals in a dual-bus system. If an IP21 component is installed, cables cannot be routed from the top of the cabinet. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 44: Installation

    UPS weight. Table 3-1 UPS weight Model Capacity Weight UPS5000-A 600 kVA 1274 kg 800 kVA 1695 kg Figure 3-1 Figure 3-2 show the installation dimensions. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 45 UPS5000-A-(600 kVA-800 kVA) User Manual (40 kVA) 3 Installation Figure 3-1 600 kVA UPS installation dimensions (unit: mm) Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 46: Installation Environment

    Reserve a clearance of at least 500 mm at the rear of the cabinet. If you need to perform operations at the rear, keep a clearance of at least 800 mm. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 47 UPS5000-A-(600 kVA-800 kVA) User Manual (40 kVA) 3 Installation Figure 3-3 Figure 3-4 show installation clearances. Figure 3-3 600 kVA UPS installation clearances (unit: mm) Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 48: Tools And Instruments

    Prepare the following tools and meters indicated in Table 3-2 for installation. Table 3-2 Tools and meters Tools and Meters Electric pallet truck Manual pallet truck Ladder Rubber mallet Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 49 Protective gloves Insulated gloves Insulation protective discharge (ESD) shoes gloves Torque screwdriver Cable cutter Brush Flat-head screwdriver (2–5 mm) Phillips screwdriver Insulated torque Heat shrink tubing Insulated adjustable Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 50: Power Cables

    4 x (4 x 240) connecto cross-sectional area Bypass Bypass input current (A) 1216 input Recommended 4 x (4 x 185) 4 x (4 x 240) connecto cross-sectional area Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 51 Routing mode: Routed over the ladder or bracket in a single layer (the routing mode for DC cables is F in IEC60364-5-52 and the routing mode for AC cables is E in IEC60364-5-52). Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 52 Bypass input circuit breaker 1250 A/3P Output branch circuit 1250 A/3P breaker Circuit breakers are used in circuits with a short-circuit current of less than 50 kA. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 53: Unpacking And Checking

    Figure 3-5. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 54 Step 3 Cut off and remove the binding tapes, as shown in Figure 3-6. Figure 3-6 Removing binding tapes Step 4 Remove the packing materials and foam, as shown in Figure 3-7. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 55 Check that the fittings comply with the packing list. If some fittings are missing or do not comply with the packing list, record the information and contact your local Huawei office immediately. Step 7 Remove the screws that secure the cabinet and pallet, as shown in...

  • Page 56: Single Ups Installation

    Figure 3-9. Otherwise, the front door will not be properly closed. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 57: Installing The Ups

    Step 1 Determine the cabinet installation position on the ground according to cabinet mounting holes (ground installation) on the marking-off template. Figure 3-10 Figure 3-11 show the marking-off template. Figure 3-12 Figure 3-13 show the hole dimensions. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 58 3 Installation Figure 3-10 600 kVA UPS marking-off template Figure 3-11 800 kVA UPS marking-off template Figure 3-12 Mounting hole dimensions for the 600 kVA UPS (unit: mm) Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 59 Knock the expansion bolt into the hole until the expansion sleeve completely fits into the hole. The expansion sleeve must be completely buried under the ground to facilitate subsequent installation. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 60 M6 x 20  The 10 soft connec connecting copper ting bars are numbered plate Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 61 (Optional M12 x 45 bypass cabinet. L-shaped connectin  The two g copper soft connectin g copper Grommet bars are strip numbered  (Optional) Eight L-shaped Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 62 800 kVA power cabinet from inside to outside, as shown in Figure 3-16. If the eight L-shaped connecting copper bars have already been installed, skip this step. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 63 Step 3 Install the two bottom connecting plates on power cabinet 1 and its adjacent bypass cabinet. The method is the same for the 600 kVA UPS and 800 kVA UPS. Figure 3-17 uses the 600 kVA UPS as an example. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 64 600 kVA UPS and 800 kVA UPS. Figure 3-18 uses the 600 kVA UPS as an example. Figure 3-18 Installing top connecting plates Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 65 Step 6 Use M12 x 60 expansion bolts to secure the cabinet to the expansion bolt holes on the ground and tighten the expansion bolts, as shown in Figure 3-20 (using a power cabinet as an example). Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 66 600 kVA UPS as an example). Figure 3-21 Installing front, rear, left, and right anchor baffle plates Step 8 Remove the power distribution covers, as shown in Figure 3-22 Figure 3-23. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 67 The power distribution covers can be removed from the bypass cabinet only when all switches are OFF. Figure 3-22 Removing power distribution covers from the 600 kVA UPS Figure 3-23 Removing power distribution covers from the 800 kVA UPS Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 68  For a 600 kVA model, removing the switch extension poles or not does not affect cabinet combination or cable connection. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 69 The following describes the methods for the 600 kVA UPS and 800 kVA UPS separately.  600kVA UPS Remove the battery copper bar assembly, as shown in Figure 3-26. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 70 Figure 3-26 Removing a battery copper bar assembly Install soft copper bars numbered from 48 to 54 from inside outwards. Figure 3-27 shows the soft copper bars. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 71 Reinstall the battery copper bar assembly. Remove the filler panel from the power cabinet, and install soft copper bars named 56, 58, and 60, as shown in Figure 3-28. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 72 Cut off the binding tapes between soft copper bar holes numbered 23, 24, 25, 26 and 30. Secure the soft copper bars numbered 23, 24, 25, 26 and 30 by using M12x45 screws, as shown in Figure 3-29. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 73 Remove the filler panel from the power cabinet and take out the two soft copper bars numbered 52 from the fitting bag. Secure them separately to power cabinet 1 and its adjacent bypass cabinet, as shown in Figure 3-30. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 74 1. The system signal interface board is located at the rear of power cabinet 1, which can be seen if the rear panel is removed. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 75 Cable Name Cable No. System Signal Interface Board in the Power Cabinet or Cable Bypass unit DL37 W301_J21 cable W303_J24 ECM 8-pin cable W305_J22 ECM monitoring W307_J25 Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 76 (main input switch, maintenance bypass switch, and bypass input switch). The following figures use a full configuration model as an example to describe how to combine cabinets and connect cables. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 77 UPS5000-A-(600 kVA-800 kVA) User Manual (40 kVA) 3 Installation Figure 3-32 Cable connection for combined cabinets (600 kVA) Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 78: Installing The Ups On Channel Steels

    Step 1 Determine the cabinet installation position on channel steels according to cabinet mounting holes (channel steel installation) on the marking-off template. Figure 3-34 Figure 3-35 show the dimensions of cabinet base mounting holes. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 79 Figure 3-35 Dimensions of cabinet base mounting holes for the 800 kVA UPS (unit: mm) (1) Channel steel mounting hole (2) Channel steel (3) Column (4) Base Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 80: Installing Batteries

    Install the batteries from the lower layer to the upper layer to prevent falling over due to imbalance. Procedure Step 1 Install a battery rack and batteries. For details, see the battery installation guide delivered along with batteries. ----End Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 81: Routing Cables

    Figure 3-36 Figure 3-37. The hole size and quantity are for reference only. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 82 Figure 3-36 Removing cable tray covers from the top of the 600 kVA UPS (1) Signal cable tray cover (2) Power cable tray cover (3) Spare power cable tray cover Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 83 (3) Power cable tray cover (4) Spare power cable tray cover (Optional) Remove the 10 screws that secure the beam, as shown in Figure 3-38 Figure 3-39. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 84 UPS5000-A-(600 kVA-800 kVA) User Manual (40 kVA) 3 Installation Figure 3-38 Removing the beam from the 600 kVA UPS Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 85 Figure 3-39 Removing the beam from the 800 kVA UPS Store the removed screws and beam. Reinstall them after connecting cables. Figure 3-40 Figure 3-41 show the power cables routed from the top of the cabinet. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 86 Figure 3-40 Routing power cables from the top of the cabinet and binding position (covers removed of 600 kVA UPS) (1) Battery (2) Bypass input power (3) Output power (4) Mains input power cables cables cables cables Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 87 Step 3 Route signal cables. Bind signal cables to the cabinet in the shortest route. Figure 3-42 shows the signal cables routed from the top of the cabinet. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 88: Bottom Cable Routing

    After routing cables, use firestop putty to fill in the gap between the cables and the cabinet. Procedure Step 1 Open the front door of the bypass cabinet, and remove power distribution covers from the bypass cabinet. Step 2 Route power cables. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 89 The hole size and quantity are for reference only. Figure 3-43 Removing cable tray covers from the bottom of the 600 kVA UPS (1) Signal cable tray cover (2) Power cable tray cover Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 90 Figure 3-44 Removing cable tray covers from the bottom of the 800 kVA UPS (1) Signal cable tray cover (2) Power cable tray cover Figure 3-45 Figure 3-46 show the power cables routed from the bottom of the cabinet. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 91 Figure 3-45 Routing power cables from the bottom of the cabinet and binding position (600 kVA UPS) (1) Battery (2) Mains input power (3) Output power (4) Bypass input power cables cables cables cables Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 92 Step 3 Lay out signal cables. Bind signal cables to the cabinet in the shortest route. Figure 3-47 Figure 3-48 show the signal cables routed from the bottom of the cabinet. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 93 UPS5000-A-(600 kVA-800 kVA) User Manual (40 kVA) 3 Installation Figure 3-47 Routing signal cables from the bottom of the 600 kVA UPS Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 94: Connecting Ground Cables

    The number and colors of signal cables in Figure 3-47 Figure 3-48 are for reference only. ----End 3.2.4 Connecting Ground Cables Figure 3-49 Figure 3-50 show the UPS wiring terminals. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 95 3 Installation Figure 3-49 600 kVA UPS PDU (1) Mains input wiring terminals (2) Battery input wiring terminals (3) Output wiring terminals (4) Bypass input wiring terminals Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 96 Figure 3-51 Figure 3-52 show how to route a ground cable from the bottom. Connect the ground cable to the UPS, as shown in Figure 3-51 Figure 3-52. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 97: Connecting Ac Input Power Cables

    (if any) extension pole and power cables to avoid friction. Connecting AC input power cables to mains input power distribution terminals 1L1, 1L2, 1L3, and N respectively, as shown in Figure 3-53 Figure 3-54. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 98 UPS5000-A-(600 kVA-800 kVA) User Manual (40 kVA) 3 Installation Figure 3-53 AC input power cables connection (600 kVA) Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 99: Dual Mains

    Step 1 Remove the rear cover of the bypass cabinet, as shown in Figure 3-55. It is recommended that you remove the side panel from the bypass cabinet before connecting cables. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 100 Step 2 Remove the connecting copper bars between mains and bypass input terminals, as shown in Figure 3-56 Figure 3-57. Properly keep the removed copper bars and bolts. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 101 Step 3 Connect mains input power cables to mains input terminals 1L1, 1L2, and 1L3 respectively. Connect the neutral wires of mains input power cables to input N wiring terminals, as shown Figure 3-58 Figure 3-59. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 102 UPS5000-A-(600 kVA-800 kVA) User Manual (40 kVA) 3 Installation Figure 3-58 Connecting mains input power cables to the 600 kVA UPS Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 103 Step 4 Connect bypass input power cables to bypass input terminals 2L1, 2L2, and 2L3. Connect the neutral wires of bypass input power cables to input N wiring terminals, as shown in Figure 3-60 Figure 3-61. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 104 After connecting cables, check that a certain clearance is reserved between the internal switch (if any) extension pole and power cables to avoid friction. Figure 3-60 Connecting AC input power cables to the 600 kVA UPS Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 105: Connecting Ac Output Power Cables

    3.2.6 Connecting AC Output Power Cables After you connect output power cables, if loads are not ready to be powered, insulate the end of the system output power cable. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 106 Connect the output power cables to output wiring terminals N, U, V, and W, as shown in Figure 3-62 Figure 3-63. Figure 3-62 Connecting AC output power cables to the 600 kVA UPS Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 107: Connecting Battery Cables

    UPS. Avoid inverse connections. Connect battery cables to battery wiring terminals –, N, and +, as shown in Figure 3-64 Figure 3-65. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 108 UPS5000-A-(600 kVA-800 kVA) User Manual (40 kVA) 3 Installation Figure 3-64 Connecting battery cables to the 600 kVA UPS Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 109 Take a battery string consisting of 40 batteries as an example. Figure 3-66 shows a neutral wire routed from the middle of positive and negative battery strings, each consisting of 20 batteries. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 110: Remote Epo

    3.2.8 Remote EPO  Huawei does not provide the EPO switch or cable. If the cable is required, the recommended cable is 22 AWG.  Equip the EPO switch with a protective cover to prevent misoperations, and cover the cable with protective tubing.

  • Page 111: Connecting Communications Cables

    Step 2 Connect the network port on a PC to the FE port. ----End 3.3 Parallel System Installation 3.3.1 Connecting Power Cables Procedure Step 1 Ground each single UPS. For details, see section 3.2.4 Connecting Ground Cables. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 112 Figure 3-70, and Figure 3-71 show the typical conceptual diagram and cable connections for a 1+1 parallel system. Figure 3-69 Conceptual diagram of a 1+1 parallel system Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 113 Figure 3-70 Connecting cables to a 1+1 parallel system (600 kVA) (1) Mains input power (2) Bypass input power (3) Battery (4) Output power cables cables cables cables Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 114 The length and specifications of power cables on each UPS must be the same to achieve current equalization in bypass mode. The power cables include bypass input power cables and UPS output power cables. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 115 UPS5000-A-(600 kVA-800 kVA) User Manual (40 kVA) 3 Installation Figure 3-72 Conceptual diagram of a dual-bus system Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 116 Figure 3-73 Connecting cables to a dual-bus system (600 kVA) (1) Mains input power (2) Bypass input power (3) Battery (4) Output power cables cables cables cables Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 117: Connecting Signal Cables

    Connect the parallel ports on the UPSs over parallel cables to create a loop.  Figure 3-75 Figure 3-76 show the wiring principle for an N+X parallel system. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 118 3 Installation Figure 3-75 N+X parallel system topology Figure 3-76 shows only the CU, which stands for the UPS. Figure 3-76 Signal cable connections of N+X parallel system Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 119: Installing Optional Components

    Figure 3-77 Connecting signal cables to a dual-bus system Connecting Other Signal Cables Connect signal cables to each UPS in the parallel system. 3.4 Installing Optional Components 3.4.1 Installing Antiseismic Kits Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 120 Figure 3-78 Figure 3-79 show the dimensions of antiseismic kit mounting holes. Figure 3-78 Dimensions of antiseismic kit mounting holes for the 600 kVA UPS (unit: mm) Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 121 Step 2 Drill holes for installing expansion bolts, and install expansion sleeve. Step 3 Open the front door, and remove support baffle plates on the front of the cabinet, as shown in Figure 3-80. Remove the rear covers. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 122 Step 4 Use M6 screws to secure the antiseismic kits to the front and rear of the cabinet to a torque of 3 N· m. Using the front of the cabinet as an example, the procedure is shown in Figure 3-81. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 123 Step 6 Use M12 x 60 expansion bolts to firmly lock the front and rear antiseismic kits to the ground. Using the front of the cabinet as an example, the procedure is shown in Figure 3-82. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 124: Installing An Ip21 Component

    Refer to the "front" and "back" silk screens on the surface of the IP21 component.  Select the mounting holes for leveling feet based on the cabinet width onsite. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 125: Installing The Ecm Extended Subrack

    Figure 3-84 Installing the IP21 component ----End 3.4.3 Installing the ECM Extended Subrack Procedure Step 1 Remove the filler panel from the ECM extended subrack, as shown in Figure 3-85. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 126 Figure 3-86 Securing an ECM extended subrack Step 3 Connect the ECM extended subrack to the control unit and the system signal interface board, as shown in Figure 3-87. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 127: Connecting An Ambient T/H Sensor

    3.4.4 Connecting an Ambient T/H Sensor Procedure Step 1 Connect the RJ11 port on the ambient T/H sensor to the COM1 port on the monitoring interface card. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 128: Connecting A Bmu

    3.4.5 Connecting a BMU Procedure Step 1 Connect a BMU to the COM2 port on the monitoring interface card. For details, see the UPS Battery Monitoring Unit User Manual (02231MNL). Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 129: Installing A Battery Grounding Failure Detector

    Step 1 Install a battery grounding failure detector. For details, see the UPS Battery Grounding Failure Detector User Manual. Figure 3-90 Figure 3-91 show the positions of battery grounding failure detectors in the UPSs. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 130 UPS5000-A-(600 kVA-800 kVA) User Manual (40 kVA) 3 Installation Figure 3-90 Position of a battery grounding failure detector in the 600 kVA UPS (1) Battery grounding failure detector Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 131: Installation Verification

    UPS may be damaged. Table 3-9 Installation checklist Item Acceptance Criteria Consistency between system The system models comply with the configurations and delivery contract. configurations Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 132 (2 V or 12 V). Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 133 2. After verifying the installation, reinstall all the covers. 3. Do not remove the dustproof cover before power-on to prevent dust inside the UPS. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 134: User Interface

    4 User Interface User Interface 4.1 LCD Interface 4.1.1 LCD Menu 4.1.1.1 Menu Hierarchy Figure 4-1 shows the LCD menu hierarchy. Figure 4-1 Menu hierarchy 4.1.1.2 Initial Startup Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 135: Main Menu

    The LCD screen is divided into three parts: status bar, alarm bar and information area. Figure shows the default main screen. Table 4-1 describes functions of all domains on the screen. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 136 Function Returns to the main screen. Goes to the lower part of a page. Goes to the upper part of a page. Returns to the upper-level menu. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 137: System Info Screen

    Runn Info screen. On this screen, you can query AC Output, UPS Load, Mains Input, and Bypass Input. See Figure 4-5 Figure 4-6. Figure 4-5 Runn Info screen 1 Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 138 AC output phase voltage/AC output line voltage/AC output phase current/AC output frequency.  Power factor Proportion of output active power to output apparent power. UPS Load Figure 4-8 shows the UPS Load screen. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 139 Crest factor Proportion of the peak value of load current to the valid value. Mains Input Figure 4-9 shows the Mains Input screen. Figure 4-9 Mains Input Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 140  Power factor Proportion of the bypass input active power to the bypass input apparent power. Battery Status Figure 4-11 shows the Battery Status screen. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 141 Backup time (min) Battery backup time estimated at the current load.  Remaining cap. (%) Remaining battery capacity. Total Runtime Figure 4-12 shows the Total Runtime screen. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 142 Figure 4-13 Environment Data screen  Ambient temperature (° C) Temperature measured by the ambient temperature and humidity sensor (Install the sensor. If the sensor is not installed, NA is displayed.) Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 143: Alarms Screen

    If the sensor is not installed, NA is displayed.) 4.1.2.2 Alarms Screen on the System Info screen to enter the Alarms screen. Figure 4-14 Alarms screen Active Alarms Figure 4-15 Active Alarms screen Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 144 If this selection is enabled, the buzzer is muted. If the buzzer is enabled, Buzzer Off is displayed on the operation screen. Figure 4-17 Buzzer Off screen Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 145: Settings Screen

    On the login screen, enter a preset user name and password, and tap to log in. The Settings screen is displayed, as shown in Figure 4-20 Figure 4-21. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 146 Set the date and time correctly. Incorrect time display in running and alarm information would lead to analysis errors during maintenance or repair. Set basic parameters, as shown in Figure 4-22 Figure 4-23. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 147 English.  Password The preset password is 000001. You can change the password. Communications Settings Set communications parameters, as shown in Figure 4-24, Figure 4-25 Figure 4-26. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 148 UPS5000-A-(600 kVA-800 kVA) User Manual (40 kVA) 4 User Interface Figure 4-24 Communication screen 1 Figure 4-25 Communication screen 2 Figure 4-26 Communication screen 3 Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 149 Ensure that the UPS IP address is unique on the network segment. Otherwise, the WebUI display function may be abnormal.  Subnet mask Set an Ethernet subnet mask that ranges from 0.0.0.0 to 255.255.255.255. The default value is 255.255.255.0.  Gateway Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 150 Battery capacity and Number of cells must be the same as the actual values. Otherwise, batteries may be damaged, or other serious faults may occur. Set basic system and battery parameters, as shown in Figure 4-27. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 151 Cell float voltage, Cell equalized volt, Float volt. temp. comp. coef., and EOD voltage threshold are set for cells. Advanced Parameter Settings Figure 4-28 Figure 4-30 show the Advanced Param. screen. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 152 UPS5000-A-(600 kVA-800 kVA) User Manual (40 kVA) 4 User Interface Figure 4-28 Advanced Param. screen 1 Figure 4-29 Advanced Param. screen 2 Figure 4-30 Advanced Param. screen 3 Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 153 Capacitor failure detection lower limit. If the power unit determines that the inverter capacitor is faulty, it shuts down the inverter to prevent the fault from expanding.  Capacitor failure detection upper limit (A) Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 154 UPS and the D.G. The D.G. power limiting (kVA) setting range is 0–5000 kVA. The default value is 800 kVA Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 155 230.0 when 400 V, 240.0 when 415 V.  Output freq. track rate (Hz/s) − The value range is 0.1–2.0 Hz/s, and the default value is 0.6 Hz/s. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 156 Upper threshold for the bypass voltage. When the difference between the bypass voltage and the rated voltage exceeds this value, the system determines that the bypass voltage is abnormal and that the bypass is unavailable. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 157 BMU. If the BMU is not configured, you do not need to set these two parameters. Set battery parameters, as shown in Figure 4-34 Figure 4-38. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 158 UPS5000-A-(600 kVA-800 kVA) User Manual (40 kVA) 4 User Interface Figure 4-34 Battery Param. screen 1 Figure 4-35 Battery Param. screen 2 Figure 4-36 Battery Param. screen 3 Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 159 Cell float voltage (V/cell) Set the float voltage. The value can be 2.23–2.27 V/cell, 2.25 V/cell by default. The value is configurable in any mode.  Cell equalized volt. (V/cell) Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 160  Dis. cur. 0.1C EOD (V/cell), Dis. cur. 0.3C EOD (V/cell), Dis. cur. 0.5C EOD (V/cell), and Dis. cur. 1.0C EOD (V/cell) Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 161 Dry contact extended card (MUE07A): provides two routes of input signals and one route of output signals. Set the dry contact parameters, as shown in Figure 4-39 Figure 4-45. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 162 UPS5000-A-(600 kVA-800 kVA) User Manual (40 kVA) 4 User Interface Figure 4-39 Dry Contacts screen 1 Figure 4-40 Dry Contacts screen 2 Figure 4-41 Dry Contacts screen 3 Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 163 UPS5000-A-(600 kVA-800 kVA) User Manual (40 kVA) 4 User Interface Figure 4-42 Dry Contacts screen 4 Figure 4-43 Dry Contacts screen 5 Figure 4-44 Dry Contacts screen 6 Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 164 PDU input surge protector or system output switch.  MUE06A connection Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 165 Corresponds to signal of the input dry contact DI_1 on the MUE07A.  MUE07A DI_2 Corresponds to signal of the input dry contact DI_2 on the MUE07A.  MUE07A DI_3 Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 166: Maintenance Screen

    Paral. Inv. ON and Paral. Inv. OFF for parallel systems, as shown in Figure 4-47. Figure 4-46 Maintenance Screen (single UPS) Figure 4-47 Maintenance Screen (parallel system) Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 167 Software, Load Config., Export Config., Export Logs, Export E-labels, and Export Alarms. This screen allows you to load software online, upgrade software, and download system data, as shown in Figure 4-49 Figure 4-50. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 168 You can start and shut down the inverter using the LCD. Before the inverter starts, the system asks for confirmation to prevent misoperation. Figure 4-51 shows the Inv. ON screen, and Figure 4-52 shows the Inv. OFF screen. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 169 This menu allows you to perform active/standby switchover on the UPS. When you need to maintain an ECM and it is working, perform active/standby switchover on the ECM, as Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 170: About Screen

    On the System Info screen, tap About. On the About screen, you can view the UPS model, manufacturer, monitoring version, and power version, as shown in Figure 4-55. To view version details, tap Version Info. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 171: System Status Screen

    The Common Functions screen allows you to query the information about the mains input, AC output, and loads, start or shut down an inverter, control the buzzer, and query historical alarms. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 172: Webui

    In monitoring and power versions earlier than V100R001C10SPC008 (software package version: V100R001C10SPC700), the software package version uses default Internet Explorer settings. In this case, ensure that Use SSL 3.0 and Use TLS 1.0 are selected. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 173 The preset UPS IP address is 192.168.0.10. You can set the UPS Ethernet IP address on the LCD or WebUI. The value range is 0.0.0.0–223.255.255.255. Table 4-4 Description of default users Preset Passwor Preset Default User Password User Rights Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 174: Monitoring Page

    Mgmt. to change the password. You can change the password in User Mgmt. on the Config. page. ----End 4.2.2 Monitoring Page After you log in to the WebUI, the Monitoring page is displayed by default, as shown in Figure 4-60. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 175: Active Alarms Page

    The Active Alarms page is displayed by default. Information Displays system monitoring information. area 4.2.2.1 Active Alarms Page You can view active alarms on the Active Alarms page, as shown in Figure 4-61. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 176: Real-Time Data Page

    4.2.2.3 Param. Settings Page On the Param. Settings page, you can set basic parameters, advanced parameters, input parameters, output parameters, bypass parameters, battery parameters, and dry contacts. See Figure 4-63. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 177: Comm. Config. Page

    On the Control page, you can control the system, as shown in Figure 4-65. For parallel systems, you can also perform Paral. Inv. ON and Paral. Inv. OFF, as shown in Figure 4-66. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 178: Query Page

    On the homepage, click the Query tab. On the Historical Alarms page, you can query historical alarms based on severity, generation time, and clear time, as shown in Figure 4-67. Figure 4-67 Historical Alarms Page Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 179: Logs Page

    Figure 4-69 Figure 4-70. Figure 4-69 User Mgmt. page On the User Mgmt. page, you can add, modify, or delete users and change user passwords. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 180 Set Email and Alarm Severity and simulate an alarm. Check that the alarm email can be received. Configure Alarm Notification Email Address is used to configure the email address for receiving alarm emails from the monitoring system. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 181: Maint. Page

    Commissioning Var., Upgrade, and Download tabs. The maintenance operations cover the bypass, power unit, and ECM, as shown in Figure 4-71, Figure 4-72, Figure 4-73, and Figure 4-74. Figure 4-71 Calib. page Figure 4-72 Commissioning Var. page Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 182 UPS5000-A-(600 kVA-800 kVA) User Manual (40 kVA) 4 User Interface Figure 4-73 Upgrade page Figure 4-74 Download page Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 183: Operations

    UPS. The voltage range is 138–485 V AC, and the frequency range is 40–70 Hz. Context Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 184 600 kVA UPS, Figure 5-2 shows the bypass unit ready switch on the 800 kVA UPS). Figure 5-1 Bypass unit ready switch on the 600 kVA UPS Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 185 Turn on the internal output switch. Turn on the internal mains input switch. Close the external input surge protection circuit breaker (if any). The UPS starts initialization. The LCD displays the Huawei logo and an initialization progress bar.  To power on a UPS in standard configuration (configured only with an internal maintenance bypass switch), perform the following operations: Turn on the external bypass and mains input switches.
  • Page 186 YYYY-MM-DD. See Figure 5-4. Set the date and time correctly. Incorrect time display in running and alarm information would lead to analysis errors during maintenance or repair. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 187 5-6. Set the voltage level, output frequency, battery capacity, and the number of batteries, as shown in Figure 5-7. System parameter settings affect UPS operation. When you set system parameters, note the following: Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 188 Figure 5-6 System Param. screen 1 Battery parameter settings have great impact on battery maintenance, battery lifespan, and UPS discharge time. When you set battery parameters, note the following: Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 189 UPS.  A high or low charging power tends to shorten the battery lifespan, or even damages batteries. To seek help about how to determine the battery capacity, contact Huawei technical support.  Number of cells refers to the number of 2 V cells in a single battery string connected to the UPS, and the number of cells must be a multiple of 12 (for example, 180 and 192).
  • Page 190 In monitoring and power versions earlier than V100R001C10SPC008 (software package version: V100R001C10SPC700), the software package version uses default Internet Explorer settings. In this case, ensure that Use SSL 3.0 and Use TLS 1.0 are selected. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 191 Login, as shown in Figure 5-11. The UPS supports Internet Explorer 8, and Firefox 31.0. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 192 5-14. Use a multimeter to measure the three-phase output voltage and frequency. The three-phase output voltage should be 220 V, 230 V, or 240 V, and the frequency should be 50 Hz or 60 Hz. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 193 In addition, the UPS may shut down before the discharging is completed, which may result in data backup failure. The Table 5-1 lists examples of setting battery parameters. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 194 If the UPS has been powered on or is working in bypass mode and you want the UPS to transfer to normal mode, perform Step 5 only if no alarm is generated. If the UPS is completely disconnected from the power supply system, perform all steps. ----End Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 195: Shutting Down And Powering Off The Ups

    To shut down the inverter on the Maintenance screen, tap System Info > Maintenance.  On the WebUI In the browser, enter the UPS IP address in the address box. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 196 Figure 5-17. Figure 5-17 Normal bypass After you shut down the inverter, the Bypass mode alarm is displayed on the LCD. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 197: Starting The Ups In Battery Mode

    Number of cells), the batteries are connected properly. Step 4 Press and hold down the BATT START button on the bypass unit for at least 2 seconds. The system automatically enters the battery cold start status. The LCD displays the Huawei logo and an initialization progress bar.

  • Page 198: Transferring To Bypass Mode

    Step 2 Select a value (± 5%, ± 6%, ± 7%, ± 8%, ± 9%, or ± 10%) from the ECO voltage range drop-down list box, as shown in Figure 5-19. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 199 System Status screen. If the bypass is abnormal, the inverter supplies power immediately. If the inverter is not started, the UPS may be disconnected. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 200: Testing Batteries

    Step 1 On the main screen of the LCD, tap System Info. Tap . The Maintenance screen is displayed. Step 2 On the Maintenance screen, tap Battery Maint.. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 201: Shallow Discharge Test

    (12–24 h, 18 h by default).  The UPS generates a battery overtemperature, overvoltage, or overcurrent alarm.  An alarm is generated. ----End 5.1.6.2 Shallow Discharge Test Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 202 The shallow discharge test automatically stops in any of the following cases:  The battery discharge capacity reaches the specified value (10%–50%, 20% by default).  The discharge voltage reaches the warning threshold (calculated in real time). Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 203: Capacity Test

    Figure 5-25 Starting a capacity test The capacity test automatically stops in any of the following cases:  The battery discharge voltage reaches the end of discharge (EOD) voltage plus 0.01 V. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 204: Test Data Download

    Step 3 Choose USB Operations > Export Logs, and select a log download path. Figure 5-26 Downloading logs Step 4 Tap Next. In the displayed dialog box, tap Yes to download data. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 205: Transferring To Maintenance Bypass Mode

    Step 2 Choose Query > Logs, select logs from the Log drop-down list box, then click Export to export logs. Figure 5-28 Logs ----End 5.1.7 Transferring to Maintenance Bypass Mode Context Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 206 ON position, as shown in Figure 5-30. The Maint. breaker closed alarm is displayed in the alarm list, as shown in Figure 5-31. Figure 5-29 Locked maintenance bypass switch Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 207 Figure 5-31 Maint. breaker closed alarm After the UPS transfers to maintenance bypass mode, the Maint. breaker closed and Bypass mode alarms are displayed on the LCD. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 208: Transferring From Maintenance Bypass Mode To Normal Mode

    The preceding figure uses the 600 kVA UPS in standard configuration as an example. The operations are the same for the 600 kVA UPS in full configuration and the 800 kVA UPS. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 209: Performing Epo

    Press the EPO button connected to the dry contact card or remove the 4-pin terminal from the EPO port on the dry contact card. Figure 5-33 EPO ports Figure 5-34 EPO alarm displayed on the LCD Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 210: Clearing The Epo State

    On the LCD, choose System Info > Alarms and tap Clear Faults. If you have not logged in, a login screen is displayed. Enter a user name and password, and tap Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 211 Login to open the homepage. Choose Monitoring > Control > System Commands and Tests and click Clear Fault. The EPO alarm is cleared successfully. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 212 Login to open the homepage. Choose Monitoring > Active Alarms to check that the EPO alarm is cleared. If the bypass input is normal, the UPS transfers to bypass mode. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 213: Parallel System Operations

    User Manual (40 kVA) 5 Operations Figure 5-40 Active alarms Step 4 Start the inverter. ----End 5.2 Parallel System Operations For detailed parallel system operations, contact Huawei technical support. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 214: Routine Maintenance

    Power grid  Input voltage: 380 V AC, 400  If the input voltage is environment V AC, or 415 V AC (line abnormal, check the power grid Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 215: Quarterly Maintenance

    The insulation layer of  Replace the cables. (between the UPS and the cables is intact and terminals  Secure the output are free from black marks Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 216: Battery Maintenance

    Before installing batteries, read through the battery user manuals and pay attention to safety precautions and connection methods provided by battery manufacture. When installing and maintaining batteries, pay attention to the following points: Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 217: Precautions For Battery Maintenance

    (2.35 V/cell ± 1%) x number of and the battery input terminals battery cells at the UPS side is greater than Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 218: Quarterly Maintenance

    3. If the fault persists, contact Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 219: Annual Maintenance

    (A torque wrench is used for checking the torque. After checking that the battery screws meet the requirements, mark the screws for later check.) Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 220: Troubleshooting

    EOD voltage and 11.3 V/cell. For details about how to rectify common faults, see Table 7-1. If any unmentioned faults occur, see the alarm list chapter, or contact Huawei technical support. Table 7-1 Solutions to common faults Case Symptom...
  • Page 221 The bypass unit Reduce the load, or normal. experiences improve ventilation. overtemperature. For details about component replacement and maintenance involved in Troubleshooting and Alarm List, consult Huawei maintenance engineers. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 222: Technical Specifications

    1000 V 1000 V AC/1000 A/3P AC/1250 A/3P Maintenance 1000 V 1000 V 1000 V 1000 V bypass switch AC/1000 A/3P AC/1000 A/3P AC/1250 A/3P AC/1250 A/3P Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 223: Environmental Specifications

    800 kVA Input system Three-phase, five-wire Rated input voltage 380 V AC, 400 V AC, or 415 V AC (line voltage) Input voltage 138–485 V AC (line voltage) Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 224: Bypass Input Electrical Specifications

    Battery string sharing The UPSs connected in parallel can share battery strings. By default, battery strings are not shared. Charge voltage  Equalized voltage: 2.35 V/cell Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 225: Output Electrical Specifications

    Load ≤ 135% at 30°C:  works properly for a long time works properly for a long time Load ≤ 125% at 40°C:  works properly for a long time Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 226: System Electrical Specifications

    600 kVA 800 kVA Redundancy design The auxiliary power supplies, centralized controllers, and parallel signals use redundancy design. ≤ 4 Number of UPSs connected in parallel Supported Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 227: A Menu Hierarchy

    Environment Data Alarms Active Alarms Historical Alarms Buzzer Off Clear Faults Settings Basic Communication Basic Param. Advanced Param. Input Param. Output Param. Bypass Param. Battery Param. Dry Contacts Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 228 Power Version Version Info Common AC Output Phase voltage Functions Line voltage Phase current Frequency Power factor UPS Load Active power Apparent power Reactive power Load ratio Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 229: Menus On The Webui

    Level-4 Menu Level-5 Menu Menu Menu Monitorin Active Alarms Real-time Input Phase voltage Data Line voltage Current Power factor Frequency Bypass Phase voltage Line voltage Current Power factor Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 230 Battery temperature Backup time Remaining capacity Env. Data Ambient temperature Ambient humidity Param. Basic Single/Parallel Settings Parameters Output voltage level Output frequency Battery capacity Number of cells Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 231 D.G. power limiting D.G. charger power ratio Intra-rack power unit start delay Inter-rack power unit start delay Input adaptability Output Output volt. Parameters adjustment Output freq. track Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 232 Automatic equalized charging Forced equalized charging protection time Equalized charging protection interval Scheduled equalized charging interval Float volt. temp. comp. Float volt. temp. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 233 Chg. volt. over range point Dis. volt. over range point Dry Contacts MUE05A connection Battery ground fault D.G. connection BCB connection Battery breaker PDC output breaker Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 234 Action MUE07A DO_2 Action MUE07A DO_3 Action MUE07A DO_4 Action MUE07A DO_5 Action MUS05A DO_1 MUS05A DO_2 MUS05A DO_3 MUS05A DO_4 MUE07A DO_1 MUE07A DO_2 MUE07A DO_3 Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 235 BMU Settings BMU start address BMUs NTC Settings Control System Inverter ON Commands and Inverter OFF Tests Clear Fault Bypass runtime Inv. runtime Forced equalized charging Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 236 SNMP port SNMP Trap Trap Address Trap port Cerificate Upload Submit Management Export certificate Export Configuration Upload Send Management configuration file Export configuration Export Multi-brand Upload Send Management Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 237 Pos. bus volt. Neg. bus volt. Zero sequence cur. Pos. batt. volt. Pos. batt. chg. volt. Pos. batt. chg. cur. Pos. batt. dis. cur. Neg. batt. volt. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 238 Rack ph. A output cur. Rack ph. B output cur. Rack ph. C output cur. Rack ph. A output volt. Rack ph. B output volt. Rack ph. C output Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 239 Rec. SW commissioning var. 3 data Rec. SW commissioning var. 4 data Rec. SW commissioning var. 5 data Inv. SW commissioning var. 0 data Inv. SW commissioning var. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 240 ECM SW commissioning var. 3 data ECM SW commissioning var. 4 data ECM SW commissioning var. 5 data Upgrade UPS Upgrade Software Download Download Serviceable data E-Label Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 241: B Alarm List

    Replace the faulty unit. for the power unit is blown. 0001-3 The mains is Check the mains. not normal. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 242 2. Check the bypass input frequency. Check the rated correctly frequency and frequency range set. configured on the LCD.  bypass input frequency is not Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 243  3. Check that the battery fuse in the battery power unit is intact. string is properly installed.  power unit battery fuse is blown. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 244  The dry detector is enabled. If yes, contact Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 245 If yes, replace the extended battery. amount of 4. Check whether any battery time. charger generates an alarm. If  yes, replace the faulty unit. charger is faulty. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 246 (This fault seldom occurs.) 1. Rectify the fault and check 0061-2 Inverter Minor  The I2C whether the alarm is cleared. alarm bus is not Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 247 0566-1 Minor overload 2. Check that the unit power is not excessive. derated due to a fan fault. 3. If the alarm persists, replace the  Derating Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 248 3. Replace the ECM. disconnec ted or short-circ uited.  Only one rack works in a parallel system.  An ECM is faulty. 0583-4 Replace the inter-rack parallel cable. inter-rack Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 249 0087-1 System Warning Check the reason why the transfer-to- neighboring neighboring UPS transfers to bypass Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 250 The running status is displayed. No breaker input circuit further measures are required. open breaker is OFF. BPM input The bypass The running status is displayed. No 0343 Critical breaker input circuit Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 251  The ECO connected. bypass voltage or frequency range is incorrectl y set.  bypass input sequence is reverse or the neutral wire is disconnec ted. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 252 Maint. Critical The user close the maintenance circuit breaker operation is breaker. misoperatio incorrect. 2. After maintenance, open the maintenance circuit breaker and then start the inverter. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 253 B Alarm List Alarm Alarm Severity Cause Solution Name (Alarm ID-Cau se ID) 0380 Warning The inverter Wait until the inverter self-check is self-check is in complete. self-check. Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 254: C Acronyms And Abbreviations

    BBB-BOX Conformite Europeenne control unit digital signal processing economy control operation emergency power off energy control module end of discharge International Electrotechnical Commission Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 255 Simple Network Management Protocol total distortion of the input current waveform THDi THDv total harmonic distortion of output voltage uninterruptible power system Universal Serial Bus valve-regulated lead acid battery VRLA Issue 03 (2017-10-16) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

This manual is also suitable for:

Ups5000-a seriesUps5000-a-800k-scUps5000-a-800k-fcUps5000-a-600k-fc

Table of Contents