Installing The Switch; Installing The Switch In A 19-Inch Rack; Mounting Brackets - H3C S1850-X Series Installation Manual

2

Installing the switch

CAUTION:
Keep the tamper-proof seal on a mounting screw on the chassis cover intact, and if you want to open
the chassis, contact H3C for permission. Otherwise, H3C shall not be liable for any consequence.
Figure2-1 Hardware installation flow
Start
Install the switch
Ground the switch
Install power supplies
Connect the power cords
Verify the installation
Turn on the circuit breakers
Operating correctly?
Connect interface cables
End

Installing the switch in a 19-inch rack

Mounting brackets

Table2-2 describes the mounting brackets applicable to the switch.
Table2-2 Mounting brackets applicable to the switch
Switch model
S1850-X switch series
Troubleshoot
the switch
No
Turn off the
circuit breakers
Yes
Mounting brackets
Mounting brackets A (provided)
2-8
Views
See A in Figure2-2.