Colorlight Calibration Pro User Manual page 51

5.The calibrated object can be modified as [Spare] only when at least one block in the
partition map of the conventional screen has accomplished analysis. Click
[Modify]. In the pop-up [Calibration Object Setting] window, you can select
[Spare], and the analysis file and photo file of the Spare object can be loaded
automatically.
Note: If you set up [ Deseam Only ] in the [ basic parameters ] setting page, only
need to shoot red color in each partition.
Fig.3-41 Shooting Photo
Fig.3-42 Shooting Photo
45
Calibration Pro User Manual