Colorlight Calibration Pro User Manual page 23

Calibration Pro User Manual
Step 6
Fig.3-7 Whole Screen Project wizard-6
Edge Reserved is used when the lamps on the edge of the screen is blocked.
Step 7
1. The wizard 6 is shown like 3-8 when the sender is not connected receiver or no
sender connected or only one sender connected.
Fig.3-8 Project wizard-6
Name: By default, it is < please enter the project name >, you need to re-enter the
project name.
Location: The path to save photos and other data generated during calibration.
click next to entry main interface.
2. The wizard 6 is shown like 3-9 when the number of sender is more than 1.
17