Connect To Server - Colorlight Calibration Pro User Manual

Calibration Pro User Manual

3.3 Connect to Server

Running calibration, select [ setting -> Connect ] to enter setting page, and input the
correct server IP. (Running CMD.exe and input [ ipconfig ] then you can get this
computer IP address is 127.x.x.x). The server port is the same as the client (the server
port default is 9933, please do not change if not necessary)
Ensure that the client and the server are in the same network area if you select
[Remote].
Fig. 3-11 Server Port Connect Window
Fig. 3-12 Server Connection Pot Window
Check the client status bar to make sure the client and server port has been connected.
As shown in Fig.3-13.
19