Camera Preparation - Colorlight Calibration Pro User Manual

Initial coefficient setting: set the initial coefficient of each time
according to the number of times of acquisition. The default values are 0,
0.1, 0.2, 0.3;

3.6 Camera preparation

1. To set up the camera
2. Canon Camera:Start the camera and shift to M mode, and then connect to the
computer via USB cable.
3. a.Canon Camera:Select [ connect camera
after the connection finished.
changed to
b.
CCM1600 or CCM6000 camera:If the PC has connected the encryption USB
stick of the corresponding camera,Select [ connect camera
icon will be changed to
an encryption USB flash disk or an incorrect encryption USB flash disk is
Fig.3-26 Multi grayscale capture
after the connection finished.If the PC does not insert
29
Calibration Pro User Manual
] in the tool bar. Its icon will be
] in the tool bar. Its