Management Port; Table 39; Pin Assignments: Dte To Dce - Nortel 8600 Series Installing

136 Appendix Ethernet Routing Switch 8600 module technical specifications
213,454 hr
Connector types
Ethernet Management port:
RJ-45 connector wired as MDI (see
port" (page 136))
Console port:
DB-9 connector (see
Modem port:
DB-9 connector (see
Cable specifications
Ethernet Management port:
Category 3, 4, or 5 UTP cable (10 Mb/s operation)
Category 5 UTP cable (100 Mb/s operation)
Console port:
RS-232 cable
Modem port:
DTE-to-DCE cable (straight or transmit cable)

Management port

The Management port is a 10/100 Mb/s Ethernet port implemented on an
RJ-45 connector wired as an MDI connection.
Table 39 "Pin assignments: 8692SF module Management port" (page 136)
shows the pin assignments for this connector.

Table 39

Pin assignments: 8692SF module Management port
Connector
Copyright © 2007, Nortel Networks
.
Table 39 "Pin assignments: 8692SF module Management
Table 40 "Pin assignments: 8692SF module Console port" (page
Table 41 "Pin assignments: DTE to DCE" (page
Pin number
1
2
3
6
4, 5, 7, 8
Nortel Ethernet Routing Switch 8600
Installing Ethernet Routing Switch 8600 Modules
NN46205-304 01.03 Standard
4.1 2 January 2007
138))
Signal
Output transmit data + (TX+)
Output transmit data - (TX-)
Input receive data + (RX+)
Input receive data - (RX-)
Not used
137))
Nortel Networks Confidential